This is a service / maintenance or supply contract in Bryan, Texas. Contact the soliciting agency for additional information.

https://assets.system.tamus.edu/files/fpc/pdf/Subcontracting/Sept2026.pdf 01-3471 Project Description: BCDC ALIAS Texas Hangar $16,400,000 Buyout is 96% complete. Underground utilities are 25% complete. Electrical duct bank is 20% complete. Concrete foundation and slab are 20% complete. Delivery Method: Construction Manager at Risk Architect/Engineer: Treanor Architects A/E Contact: Erin Machac General Contractor: Joeris General Contractors Contractor Contact: emachac@treanor.design Marty Garza Subcontractor Bidding: Summer 2026 Substantial Completion: June 2027 marty.garza@joeris.com -------------------------------------------------------------------- https://www.tamus.edu/regents/wp-content/uploads/sites/28/2026/07/Index-May-21-2026-REV-5.18.26.pdf Approval of the Project Scope and Budget, Appropriation for Construction Services, and Approval for Construction for the Bush Combat Development Complex - ALIAS Texas Hangar Project, The Texas A&M University System, Bryan, Texas (Project No. 01-3471), A&M System -------------- https://assets.system.tamus.edu/files/fpc/pdf/Subcontracting/November2025.pdf 01-3471 BCDC ALIAS Texas Hangar $9,150,000 FY2025 Project Description: Capital Plan Status: Delivery Method: RFQ Posting: RFP Posting: A new structure to shelter up to 4 Blackhawk helicopters and a simulation unit for training and research. The helicopters are operational and planned to take off and land near the hangar. The 25,000+ SF building will have a height of at least 60 ft clearance. A railed overhead hoist will allow for ease of aircraft maintenance, sensor placement and cleaning. The hangar space requires a curtain separation and viewing window from the control room into one bay. This will allow the researchers to test sensors within an identifiable boundary. Additionally, there must be storage space for replacement parts required for aircraft maintenance. The conditioned portion of the hangar will include a control room, technology and hardware storage, server room, and offices. Construction Manager at Risk Complete Complete Project is listed on the FY26-FY30 Capital Plan as approved. A/E and CMAR contracts will not be executed until completion of the POR. Capital Plan Notes: Member Contact: Programming Firm: FP&C Delivery Team: Harry Cohen TreanorHL Randy Wipke hcohen@tamu.edu --------------------------------------------------------- https://assets.system.tamus.edu/files/fpc/pdf/Subcontracting/September2025.pdf 01-3471 BCDC ALIAS Texas Hangar $9,150,000 FY2025 Project Description: Capital Plan Status: Delivery Method: RFQ Posting: RFP Posting: A new structure to shelter up to 4 Blackhawk helicopters and a simulation unit for training and research. The helicopters are operational and planned to take off and land near the hangar. The 25,000+ SF building will have a height of at least 60 ft clearance. A railed overhead hoist will allow for ease of aircraft maintenance, sensor placement and cleaning. The hangar space requires a curtain separation and viewing window from the control room into one bay. This will allow the researchers to test sensors within an identifiable boundary. Additionally, there must be storage space for replacement parts required for aircraft maintenance. The conditioned portion of the hangar will include a control room, technology and hardware storage, server room, and offices. Construction Manager at Risk Currently Posted Currently Posted Project is listed on the FY26-FY30 Capital Plan as approved. A/E and CMAR contracts will not be executed until completion of the POR. Capital Plan Notes: Member Contact: Programming Firm: FP&C Delivery Team: Harry Cohen TreanorHL Randy Wipke ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- the selection process to enter into a contract with a Construction Manager at Risk (CMAR) firm to provide pre-construction services such as constructability guidance, cost estimates, and construction schedules; provide a Guaranteed Maximum Price (GMP); and perform complete construction services consistent with the CMAR construction delivery process as utilized by The Texas A&M University System for the BCDC ALIAS Texas Hangar project (#01-3471) on the RELLIS Campus in Bryan, Texas. The Bush Combat Development Center (BCDC) and The Texas A&M System, with support from the State of Texas, are developing a new 40,000 SF facility at the RELLIS Campus to support the Aircrew Labor In-cockpit Automation System (ALIAS). The facility will feature two hangar bays for Sikorsky UH-60 Black Hawk and Boeing CH-47 Chinook aircraft, with support spaces for simulation, testing, data operations, and staff functions. Designed as a PreEngineered Metal Building (PEMB), the project incorporates concrete floors, aircraft lifts and cranes, apron space, and utility extensions. Additional elements include a communicationstower, fuel storage and filling area,staff parking, and accommodation for a mobile Ground Control Station. The facility will comply with RELLIS standards, accommodate future expansion of two hangars, and offer network connectivity to the Research Integration Center. The Planning Amount for the project is $9,150,000, which includes an Amount Available for Construction Contract (AACC) of $6,705,000. Fees, furnishings, other work, miscellaneous expenses, and contingencies make up the balance of the Planning Amount. This RFP is the process for selecting a CMAR firm for the project as provided by Texas Education Code 51.782(e). The RFP provides the information necessary to prepare and submit Proposals, including fee proposals and general conditions prices. The Owner will rank the Respondents in the order that they provide the “best value” for the Owner based on the published selection criteria and on the ranking evaluations. Interviews of CMAR firms may follow at the Owner’s option.