Renovation of an educational facility in Verona, New York. Completed plans call for the renovation of a 23,231-square-foot, two-story above grade educational facility.

A. Provide complete installation, including luminaires, standards, hangers, supports, fittings, lamps, wiring, connections and controls, as indicated in the Contract Documents. Types of luminaires in this project include LED. B. Provide startup of all lighting control systems by a factory certified manufacturers representative in order to maintain all warranties. The contractor shall complete all startup request forms and complete all pre-startup installations a minimum of 2-weeks in advance or as otherwise required by the manufacturer. Provide initial system settings and owner training. C. Provide Lighting System Functional Testing as described in this section by a factory authorized manufacturers representative hereby referred to as the Testing Agent. Question Deadline 10/10/2025 Deadline Requests received ten (10) days prior to date of receipt of Bids. Madison-Oneida BOCES invites sealed bids, in duplicate, for General Construction Contract, HVAC Contract Contractors should refer to the 2008 Wicks Reform and New York State Labor Law Section 220-i for additional bid submission procedures and requirements not otherwise outlined in the contract documents. The work of this project shall be completed by the dates set forth in Section 011000 "Summary of Work." Each Bidder must deposit with its Bid, security in an amount and form subject to the conditions provided in the Contract Documents. The Owner reserves the right to waive any informality in or to reject any or all Bids. Contractors should refer to the 2008 Wicks Reform and New York State Labor Law Section 220-i for additional bid submission procedures and requirements not otherwise outlined in the contract documents. Requests for interpretation, information or clarification (RFI) of the Contract Documents must be made in writing. Responses to RFIs will not be made over the telephone. Responses to RFIs will be advisory only and will not modify the Contract Documents. The Contract Documents stand as published except as modified by written Addenda before bid and Modifications after execution of the Agreement. RFIs may be emailed to: Mike Stickles at mstickles@kingarch.com Damien Zombek at dzombek@cscos.com Copy: Tanya Destito at tdestito@kingarch.com Examination of Contract Documents Contract Documents may be examined at the following locations: King + King, Architects LLP 358 West Jefferson Street Syracuse, NY 13202 315.682.6180 315.682.7891 (f) Plan and Print Systems, Inc. 6160 Eastern Avenue Syracuse, NY 13211 315.437.5111 315.463.1510 Contract Documents may be downloaded from the Plan and Print Systems, Inc. website for a non- refundable cost of $49.00. Electronic Contract Documents on a flash drive may also be obtained from Plan & Print (Telephone: 315.437.5111, Fax: 315.463.1510) upon payment of a non-refundable $49.00 plus shipping and handling per flash drive. Contact Plan & Print for shipping and handling costs. Checks shall be made payable to Plan & Print Systems, Inc. Contract documents will be delivered via UPS Ground service upon request and receipt of an additional non-refundable delivery and handling charge, payable by separate check to Plan & Print Systems, Inc. Contact Plan & Print for shipping and handling costs. Any sets required in excess of the above-mentioned maximums are to be obtained directly by interested parties at the full cost of printing, at their cost, directly from Plan and Print Systems. Upon returning sets promptly and in re-usable condition to Plan and Print Systems, Inc. within 30 days after the date of the Bid opening, deposits will be refunded as follows: l. Any Bidder will be refunded his or her deposit in full. 2. All other persons receiving any or all the Contract Documents, including Subcontractors and Material Suppliers, will be refunded their deposit in full. All Contract Documents received (except for Documents held by Successful Bidders) must be returned to Plan and Print Systems, Inc., at the above address.