Renovation of a swimming pool in Clermont, Florida. Completed plans call for the renovation of a swimming pool.

The Swimming Pool Resurfacing Project involves the complete renovation of the City's main pool and wading pool, aiming to restore safe, durable, and visually appealing swimming facilities that comply with all applicable ADA, State, County, and City regulations. The scope of work consists of draining both pools, removing all existing plaster, tiles, and depth markers, repairing surface defects, and applying a new Bond Kote base followed by an exposed quartz plaster finish in Krystal Blue or a similar color. Work also includes the installation of new waterline and step tiles, replacement of LED light fixtures in the main pool, installation of new VGBA-compliant main drain grates, and the addition of updated depth and "No Diving" markers. The contractor will be responsible for all surface preparation, material application, water refilling, debris removal, and site cleanup. All work must be completed within the established project timeline, which is approximately four to five weeks, under the supervision of the City Project Manager. Progress photos and inspections are required at each phase. The budget for this project is $100,000. Question Deadline 12/03/2025 at 3:00 PM ET The City of Clermont requires all questions relating to this solicitation to be entered through the Question and Answer tab on the Portal. Responses to questions will be provided online. Verbal inquiries will not be accepted Additional bid open note: Dial by your location _ +1 305 224 1968 US _ +1 301 715 8592 US (Washington DC) _ +1 309 205 3325 US _ +1 312 626 6799 US (Chicago) _ +1 646 558 8656 US (New York) _ +1 646 931 3860 US _ +1 360 209 5623 US _ +1 386 347 5053 US _ +1 507 473 4847 US _ +1 564 217 2000 US _ +1 669 444 9171 US _ +1 689 278 1000 US _ +1 719 359 4580 US _ +1 720 707 2699 US (Denver) _ +1 253 205 0468 US _ +1 253 215 8782 US (Tacoma) _ +1 346 248 7799 US (Houston) Meeting ID: 862 2143 8465 Passcode: 868480 The Contractor shall provide all labor, materials, equipment, supervision, and incidentals required to resurface the Main Swimming Pool and Wading Pool, in full compliance with applicable ADA standards, Florida Building Code (FBC), and State, County, and City health and safety codes. B. Documentation and Communication o Submit progress photos before each new phase and include documentation of any damage or disrepair. o Identify all existing and potential future defects before starting work. o Notify the City Project Manager immediately and schedule an on-site inspection before proceeding with corrective work. o Provide a written proposal and cost estimate for any additional work within seventytwo (72) hours of the meeting. o Proceed only upon written authorization from the City. C. Site Access and Working Hours o Work is permitted Monday through Friday, 8:00 AM to 6:00 PM. o No work shall occur on weekends or City-observed holidays without prior written approval. o The Contractor is responsible for maintaining a clean, safe worksite and protecting surrounding facilities. D. Protection Measures o Plug all pool drains, supplies, and return lines to prevent debris entry. o Implement erosion, dust, and waste control measures throughout the project. o Remove all waste and debris from the site on a daily basis. 3.2. Main Pool Specifications A. Pool Data o Area: 2,700 sq. ft. o Perimeter: 250 ft. o Volume: 80,784 gallons B. Surface Preparation o Drain the pool and control groundwater as needed. o Ensure surfaces are dry before work begins. o Remove all delaminated, cracked, or loose plaster; stains; and pitted areas. o Remove all existing tiles, depth markers, and fittings. o Bevel around all wall penetrations (lights, main drains, fittings) for a flush finish. o Modify gutter slopes and lips as required by code. o Pressure wash and acid wash all surfaces. o Apply Bond Kote to prepare the surface for the new finish. C. Tile and Finish Installation o Install new 6"x6" cobalt blue (or similar) waterline and beam tiles. o Install 2"x6" bullnose tiles at steps and gutter lips (set at a 2" pitch). o Install the following: Depth markers: (10) 6'-0", (4) 5'-0", (4) 4'-0", (12) 3'-0" "NoDiving" markers: (15) 6"x6" tiles LED fixtures: (5) new fixtures in existing niches Main drain frame: 12"x12" with VGBA-compliant grate D. Plaster Application o Apply a smooth, monolithic exposed quartz finish (Krystal Blue or similar) at 3/8" to 1/2" thickness. o Finish shall be uniform in color, free of stains, streaks, or trowel marks. E. Finalization o Fillthe pool with City-provided water. o Clean all affected areas. o Schedule and complete final inspection with the City Project Manager. 3.3. Wading Pool Specifications A. Pool Data o Area: 450 sq. ft. o Perimeter: 90 ft Volume: 2,525 gallons B. Surface Preparation o Drain and dry the pool; control groundwater as required. o Chip off and repair all defective surfaces. o Remove existing tiles. o Pressure wash and acid wash interior surfaces. o Apply Bond Kote to all prepared areas. C. Tile and Finish Installation o Retile inside beam with 6"x6" cobalt blue (or similar) tile. o Retile steps with 2"x6" bullnose cobalt blue tile. o Replace 12"x12" main drain frame and grate (VGBA compliant). o Install new depth and "No Diving" markers as required by FBC. o Resurface with exposed quartz finish (Krystal Blue or similar) at 3/8" to 1/2" thickness. D. Finalization o Fill the pool with City-provided water. o Remove all debris and clean the site. o Notify the Project Manager for final inspection.