Site work for a road / highway in Gonzales, Louisiana. Completed plans call for site work for a road / highway.

OJT Goal: Trainees Specbook: 2016 Parish(es): Ascension; East Baton Rouge Estimated Construction Cost: $100,000 to $250,000 All questions concerning the plans shall be submitted via the Electronic Plans Distribution Center known as Falcon. All submitted questions will be forwarded by email to the Project Manager and the Project Engineer. Questions submitted within a period of 96hours prior to the advertised time for the opening of bids, excluding Saturdays, Sundays, and any other legal holidays, may not be answered prior to bidding. Falcon may be accessed via the Internet. From the home page, select BUSINESS Working With DOTD, then select Project Letting Info. On the Construction Letting Information page, select the link, DOTD Plans Room (Falcon); Login to Falcon (or request an ID if a first-time user). Once logged in, you will have access to view Project Information, submit a question concerning the project, and view the plans. To avoid any suggestion that a potential bidder is using the Falcon system to communicate with other potential bidders, DOTD will not post any question or any statement of fact or opinion not made for the purpose of seeking clarification of plans and/or specifications. Any non-questions posted on falcon will be limited to the statement of an issue considered unresolved by a previous DOTD response. LADOT - District 61 South: Striping *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. Furnish and place reflective pavement markings of hot applied thermoplastic or preformed (cold or hot applied) plastic at the locations shown on the plans. Plastic pavement markings include stripes, gore markings, lines, legends, and symbols. This specification covers hot-sprayed, hot-extruded, ribbon gun, and preformed thermoplastic compound for pavement markings on asphalt or portland cement concrete pavement. Thermoplastic marking material shall consist of an alkyd based formulation. Non-preformed material shall be manufactured so as to be applied by spray 40 mils thick or extrusion 90 mils thick or greater to pavement in molten form, with internal and surface application of glass spheres, and upon cooling to normal pavement temperature, shall produce an adherent, reflectorized pavement marking of specified thickness and width, capable of resisting deformation. Black thermoplastic pavement markings shall require skid-resistant filler in lieu of glass beads. Black thermoplastic pavement markings shall have identical material properties to their white thermoplastic counterparts with the exception of color. For yellow thermoplastic material, the type and amount of yellow pigment shall be at the option of the manufacturer, providing all other requirements of this specification are met. However, the pigment for yellow thermoplastic shall be lead free and shall meet the regulatory level of nonhazardous waste as defined by 40 CFR 261.24 when tested in accordance with EPA Method 1311, Toxicity Characteristics Leaching Procedures. The manufacturer shall provide certification that the material provided meets these requirements.