Site work for a development in Narvon, Pennsylvania. Completed plans call for site work for a development.

The Project consists of the following: o Furnish and install 6 (six) standard vertical extraction wells and 3 vertical extraction wells with slip casings. o Furnish and install approximately 350 linear feet of 12-inch HDPE gas conveyance piping. o Furnish and install approximately 130 linear feet of 6-inch HDPE gas conveyance piping. o Furnish and install approximately 140 linear feet of 6-inch HDPE gas conveyance piping in common trench with 2-inch HDPE compressed air piping and 4-inch HDPE condensate forcemain piping. o Furnish and install approximately 130 linear feet of 2-inch HDPE compressed air piping and in common trench with 4-inch HDPE condensate forcemain piping. o Furnish and install all wellheads, fittings, valves and appurtenances. o Furnish and install 3 (three) vertical extraction well dewatering pumps and appurtenances. o Pull and relocate 2 (two) existing vertical extraction well dewatering pumps, including furnishing new tri-hose tubing. o Furnish and install 2 (two) LFG isolation valves. o Furnish and install 4 (four) force main air relief valves o Abandonment of existing LFG conveyance piping, compressed air piping, and force main piping below grade. o Abandonment of 9 (nine) vertical extraction wells; three having slip casings. o Surveying, site preparation, erosion and sediment controls and restoration. Question Deadline 12/12/2025 at 5:00 PM ET Location : online portal Doc.Note- Prospective Bidders may examine the Bidding Documents at the Lanchester Landfill, 7224 28th Division Highway, Narvon, PA 17555 beginning November 18th, 2025 and thereafter, on Mondays throughFridays between the hours of 8:30 a.m. and 4:00 p.m., and may obtain copies of the Bidding Documentsfrom the Issuing Office as described below. The work to be performed under these contract documents includes, but is not limited to, the following: 1. Mobilization and demobilization of equipment and personnel for the project. 2. Establishment and maintenance of erosion and sediment control throughout the project. 3. Drill and install six standard vertical extraction wells and three vertical extraction wells with slip casings. 4. Installation of 12-inch HDPE piping and 18-inch CMP road crossing pipe that connects two existing 12-inch HDPE piping at a northern and southern tie-in. 5. Relocation of existing collection device wellheads from the existing wells being abandoned to the newly drilled vertical wells. 6. Installation of 6-inch HDPE lateral piping. 7. Installation of 2-inch HDPE compressed air piping and 4-inch HDPE condensate force main piping and required top packages. 8. Furnish and install three vertical extraction well dewatering pumps. 9. Relocation of two vertical extraction well dewatering pumps, including furnishing new tri-hose tubing. 10. Furnish and install two LFG isolation valves. 11. Furnish and install four force main air relief valves, including totes and appurtenances. 12. Furnish and install HDPE piping and tie-in to existing systems and appurtenances for the new collectors. Completion- 115 days