Site work for a water / sewer project in Chatham, New Jersey. Completed plans call for site work for a water / sewer project.

For the above named Contract, which comprises the installation of drainage improvements including a riprap channel with 8-foot bottom width on a steeply sloped area within the Township of Chatham, Morris County, New Jersey. he work includes the furnishing of all labor, materials and equipment necessary to complete the work as shown on the Drawings and as described in the Specifications. The work consists of construction of drainage improvements including, but not limited to, HDPE piping, drainage structures and a trapezoidal riprap channel with 8-foot bottom width on a steeply sloped area. The work is located on Block 67, Lot 12 on Hillside Avenue, currently an undeveloped and wooded lot containing public walking trails within the Township of Chatham and includes: site work and general construction. The work shall be completed within 90 calendar days of the Contractors receipt of written Notice to Proceed. Docs notes: The Contract Documents may be obtained by any prospective bidder upon payment of a fee for each set of full-sized drawings with specifications by calling 1-877-424-3738 or by online request. Shipping charges are additional and variable depending upon the pick-up or delivery option selected by the purchaser. Bid documents can not be obtained at the Chatham Township Municipal Building or at Mott MacDonalds office. The printing cost is not refundable The Owner reserves the right to reject any or all bids and to waive minor informalities or irregularities in bids received in accordance with public law The Contractor is to review the Drawings and Specifications to determine the extent of the work. The Contractor is specifically alerted to this section concerning inspection of the existing field conditions. The Contractor is to visit and inspect the project prior to preparing his bid in order to clearly familiarize himself with all field conditions, the intent of the design, and the extent of all work. After his review and inspection is complete, and before he submits his bid, if the Contractor has any questions regarding the extent and details of the work, he is to submit them to the Engineer in writing. Before proceeding with any work, the Contractor is to confirm methods of construction, obtain field measurements, and verify all dimensions on the Drawings as required. Failure of the Contractor to familiarize himself with all drawings relating to the work and conditions existing at the site of construction will not relieve him of his obligation to furnish all material and labor necessary to carry out the provisions of the Contract Documents and to complete the contemplated work for the consideration set forth in his bid. Question Deadline 12/23/2025 No interpretations of the meaning of the Contract Drawings, Specifications or other Contract Documents will be made to any bidder orally. Any request for interpretations shall be made in writing, addressed to Mott MacDonald, 412 Mt. Kemble Avenue, Suite G22, Morristown, New Jersey 07960, and, to be given consideration, must be received at least twelve (12) days - Saturdays, Sundays and holidays excepted - prior to the date fixed for the opening of bids.