Renovation of a residential development in North Ogden, Utah. Completed plans call for the renovation of a residential development.

Only contractors who have been prequalified under a Stage I Prequalification for Contractors and are currently on the respective DFCM Prequalified Contractors list as of the date of this solicitation are eligible to bid on this project. The State of Utah - Division of Facilities Construction and Management (DFCM) is requesting bids for the referenced project. Improvement to the VA Home Air Quality. Questions Due Date: Dec 30th 2025, 3:00 PM MST : Online portal. The project described herein is the Ogden VA Home Air Quality Improvement project. This work shall include all labor, materials, equipment, fixtures, and devices for the entire mechanical work and a complete operating and tested installation as required for this project. A. Submission of Operating and Maintenance Manuals complete with Balancing reports. B. Coordination of work required for system commissioning. C. Provide a hard copy and an electronic copy on CD of the O and M manual fully searchable in PDF format. A. The contractor is to integrate into the existing Facility Management and Control System (FMCS) Contractor and shall fully integrate into building automation system, incorporating direct digital control (DDC) for energy management, equipment monitoring and control as herein specified. The system shall include all required hardware, controllers, sensors, transmission equipment, system workstations, local panels, conduit, wire, installation, engineering, database and setup, supervision, commissioning, acceptance test, training, warranty service and, at the owner's option, extended warranty service. Include all upgrades for a period of two years. B. The system shall only employ BACnet or Lontalk communications in an open architecture with the capabilities to support a multi-vendor environment. The software package shall be sold and promoted by at least three independent controls manufacturers. It shall include the provisions to load and execute the toolsets of each of the three manufacturers including commissioning, configuring and programming of each manufacturer's equipment. The system shall be capable of integrating third party systems and utilizing the following standard protocols. 1. BACnet communication according to ASHRAE standard ANSI/ASHRAE 135-2024. 2. OPC server communications according to OPC Data Access 2.0 and Alarms and Events 1.0. 3. LonWorks communication using LonTalk protocol. 4. Modbus communication for integration to third party devices. C. The FMCS shall be web based and shall provide total integration of the facility infrastructure systems with user access to all system data either locally over a secure Intranet within the building or by remote access by a standard Web Browser over the Internet. D. The FMCS shall demonstrate, with (3) proof sources, integration with HVAC industry open standard protocols, including LonMark, BACnet, ModBus, OPC and Internet standard SQL database and HTTP / HTML / XML text formats. E. The FMCS shall communicate to third party systems on this project including VFD's, boilers, air handling systems, transfer switches, fire-life safety systems and other building management related devices using any of the open, interoperable communication protocols referenced in Paragraph D. F. All materials and equipment used shall be standard components, regularly manufactured with standard part numbers and owners manuals for this and/or other systems. One of a kind, third party or custom integrations devices designed specially for this project will not be allowed. A. It is the intent of this specification to set the minimum acceptable requirements for the design, construction, installation, commissioning and vendor support requirements for the VFD systems herein specified. B. The VFD installation and associated equipment coordination and interface shall be provided by the ATC contractor. Mounting VFD and connecting 4-20mA control signal shall be by the ATC contractor. Power wiring to and from the VFD to the motor shall be by Division 26.