Renovation of a laboratory facility in Louisville, Kentucky. Completed plans call for the renovation of a laboratory facility.

Pre-TAB: Perform pre-TAB on existing airside and hydronic systems, prepare report, and submit to Owner. Mechanical: Inspect, clean, and disinfect existing supply/return/exhaust ductwork and plenums scheduled to remain. Disconnect, remove, and replace select fume hoods and associated appurtenances where indicated within the laboratory space. Disconnect, remove, and replace portions of the existing exhaust duct as indicated where it extends through the existing roof deck. Disconnect, remove, and replace the existing rooftop-mounted exhaust fans, plenum, and roof curbs. Disconnect, remove, and replace the existing inline chilled water pump, air separator, and appurtenances. Electrical: Miscellaneous supporting electrical work is included in the scope of the project. Architectural: Saw-cut, remove, and replace a select portion of the existing low-slope roofing system including rigid board insulation down to the existing metal roof deck as required for demolition and new work. Commissioning & Closeout: Provide start-up/testing and TAB of new systems, perform Owner training, and provide O&M manuals and record documents in accordance with specs. Questions Due Date: May 1st 2026, 10:00 AM EDT The Engineer's Construction Cost Estimate for this project is between $ 900,000 to $1,500,000. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.