Renovation of a municipal facility in Baldwin Place, New York. Design plans call for the renovation of a municipal facility.

This is a design project only. SCOPE OF WORK includes, but is not necessarily limited to the following: 1. Vendor will design new 2nd Floor Egress Stairs to replace existing Egress Stairs including the concrete walkway leading to the driveway. 2. Designs will incorporate ADA guidelines in the allotted space/ construction area. 3. Specifications OPWDD required for designs: a. Brackets/ Post Bases/ Fasteners: Stainless steel materials will be used unless it not available by manufacture. An equivalent will be used in its place. b. Rough Lumber- High quality #2 grade or better will be used. c. Decking- Composite material boards will be used like Trex or equivalent. d. Railing- ADA standard railing will be used. e. Handrail- ADA compliant handrail will be installed. (PVC coated over Aluminum) f. Landing: All landings are a minimum of 36 sq. ft. 4. Design will shall comply to the current NYS Code and Manufacture guideline. 5. The design must be approved by OPWDD's Architect. 6. Any code violations per design will be the designer's financial responsibility for changes. Somers Egress Stairs Design Only. The vendor shall provide all labor and materials necessary to complete the work in a professional manner according to scope of work and architectural drawings if supplied. Work is to be completed within 30 days of award, unless modified below. This is a NYS Public Works project and prevailing wages are to be paid. Refer to attached specification for the following scope of work. Site must be cleaned and all materials secured at the end of each work day. Absolutely no scraps, especially fasteners, are to be left unsecured. Upon completion of project, before removal of equipment and scaffolding, contractor is to schedule a quality control and quality assurance inspection with Plant Superintendent.