Renovation of a mixed-use development in Hollyvilla, Kentucky. Completed plans call for the renovation of a educational facility; and educational facility.

Bidders are required to be present at the bid opening. Bid documents can be obtained from McCulloch Associates Inc, available at Lynn Imaging. Goals for participation are set at 15% for Minority Business Enterprises and 10% for Women Business Enterprises in all construction contracting. The right is reserved to accept any bid, reject any or all bids, or waive any informality in the bids received if it is in the best interest of the owner. A. Furnish labor and materials to complete reroofing work indicated, as specified herein, or both. Work under this contract shall include materials and labor necessary for reroofing all or part as hereinafter specified. B. CORAL RIDGE ELEMENTARY SCHOOL 10608 NATIONAL TURNPIKE Louisville, KY 40118 1. Remove existing roofing, roof insulation, gravel stops, fascia, and expansion joints completely to the structural deck. Remove roof ventilators, ductwork during reroofing. Do not split corners or turn up the counter flashing. 2. Inspect all Roof Drains, Gutters, Downspouts, and interior piping for leaks before demolition starts. Report any damage or leaks to the Owner and the Architect before roof installation. 3. Replace any deteriorated wood nailers, install new nailers (blocking), fascia, as necessary. Install new, or raise existing curbs, nailers, ducts, electric lines, etc., as necessary for a minimum height of 10" above the finish roof surface. 4. Roofing Type I Tapered a. Existing Concrete Deck b. Primer c. 2 Ply Mopped and glazed (temporary roof) d. 2 layers of rigid insulation to achieve minimum LTTR 25 -- see specification section 07 22 00 Roof and Deck Insulation for further details. e. Tapered insulation -- 1/4" per ft slope f. Coverboard g. Modified Base Sheet h. Modified cap sheet with granule surface 5. Install base flashing. Install a pressure bar at the top of all base flashing. Install leader heads, downspouts, scuppers, and counterflashing. 6. Reinstall ventilators, exhaust fans; make necessary mechanical and electrical connections. No roof flashing penetration (screws), or attachments of any kind at equipment curbs. 7. Leave roof, wall, site, etc., clean and in first-class watertight condition at completion of work. 8. Grounds must be inspected, with the use of a metal detector, to remove all nails, metal scraps, etc.