Site work and renovation of a pre-engineered storage facility in Bolivia, North Carolina. Completed plans call for site work for a pre-engineered storage facility; and for the renovation of a pre-engineered storage facility.

**As of February 4th, 2026, this project has not yet been awarded. The project is expected to be awarded on February 16th, 2026** Brunswick County is soliciting bids from qualified contractors to furnish all labor, materials, equipment, permits, and services necessary to supply and erect a pre-engineered steel structure to serve as a covered equipment storage facility located at 179 March 9, 1764 Drive, Bolivia, NC 28422. The structure will be open sided with no walls and must be designed and constructed in accordance with the North Carolina State Building Code and all Brunswick County requirements. Questions or requests for further information regarding this Invitation to Bid shall be submitted in writing to the attention of Donna Donahue at donna.donahue@brunswickcountync.gov no later than January 13, 2026, at 1:00 pm ET. A copy of all questions, further clarifications and answers will be made in the form of an Addendum to this Invitation to Bid and will be provided to all known bidders and posted on the County's website. Contractor Responsibilities: o Provide engineered design drawings, calculations, and engineer stamped submittals. o Obtain all required Brunswick County building permits and schedule inspections. o Excavate, form, reinforce, and pour concrete footings/piers as required by engineering. o Supply and erect pre-engineered steel frame system, including roof panels, trim, flashing, and all hardware. o Ensure proper alignment, bolting, welding (if required), and fastening per manufacturer specifications. o Provide touch-up coatings, weatherproofing, and cleanup of worksite. County Responsibilities: o Furnish a site plan and mark building corners. o Perform site grading and leveling prior to contractor mobilization. Exclusions: o Concrete slab or pavement. o Wall panels or enclosures. o Electrical, plumbing, or mechanical systems. o Interior build-out or finishes. o Site clearing or grading (to be completed by County). SPECIFICATIONS o Dimensions: Seventy-five (75) feet wide x One Hundred Twenty-five (125) feet long clear span. o Structure: Pre-engineered red steel frame system with roof covering only. o Height: Minimum sixteen (16) feet at the eaves. o Overhangs: Two (2) feet on all sides. o Foundation: Concrete footings/piers for all vertical columns (no full slab). o Warranty: One (1) year workmanship; twenty (20) year manufacturer. o Code Compliance: Must be engineered and rated to meet North Carolina Building Code. If required by applicable statute, the Contractor shall furnish performance and payment bonds covering 100% of the contract amount for the faithful performance of the Agreement and payment of all obligations arising under or related in any way to the Project. bid date desp- Brunswick County will not be responsible for the failure of any mail or delivery service to deliver a bid prior to the stated date and time. Incomplete Bids or bids inconsistent with the required format shall be disqualified from consideration. The Contractor shall have proper licenses, as required by applicable statute, governing their respective trades. General Contractors acknowledge and agree that, if applicable, Chapter 87 of the North Carolina General Statutes will be observed for the Project. The Contractor is required to provide proof of applicable licensure prior to commencing any work on the Project. The work shall begin within ten (10) days of issuance of a Notice to Proceed by Brunswick County and shall be completed within one hundred eighty (180) days of issuance of the Notice to Proceed.