Site work for a stadium in Rochester, New York. Completed plans call for site work for a stadium.

The Work of Project is defined by the Contract Documents and consists of the following: Provide all labor, materials, fabrication, and installation of the following sign types as indicated in the Contract Documents: 1. Directional Signs (Type D): Fabricate and install directional signs (D5, D6) consisting of 1/8-inch thick painted acrylic backer panels with computer-cut raised tactile lettering, (D6) requires Braille, and pictograms in compliance with ADA requirements. Provide acrylic shim plates for stand-off mounting. Attach to substrate type as indicated with adhesive foam tape mounting (VHB or Equal) and silicone when needed. 2. Identification Signs (Type ID): Fabricate and install identification signs (ID1, ID2, ID8, ID9) consisting of 1/8-inch thick painted acrylic backer panels with computer-cut raised tactile lettering, Braille, and pictograms in compliance with ADA requirements. Provide acrylic shim plates for stand-off mounting. Attach to substrate type as indicated with adhesive foam tape mounting (VHB or Equal) and silicone when needed. 3. Regulatory Signs (Type R): Fabricate and install regulatory signs as follows: a. R1 through R21: Digitally printed graphics on painted 1/8-inch aluminum composite material (ACM) panels, mechanically fastened through panel faces to substrate with tamper-resistant and weather-resistant fasteners as indicated. b. R31: Translucent frosted vinyl graphics (3M Crystal or approved equal) applied to designated surfaces. 4. Exterior Wayfinding Signs (Type X): Fabricate and install exterior wayfinding signs as follows: a. X1 through X11: Digitally printed graphics on painted 1/8-inch aluminum composite material (ACM) panels, mechanically fastened through panel faces to substrate with tamper-resistant and weather-resistant fasteners as indicated. b. X12: Translucent frosted vinyl graphics (3M Crystal or approved equal) applied to designated surfaces. Question Deadline 01/20/2026 at 5:00 PM ET All requests for bid clarification must be submitted in writing to the Buyer Sean Wilcox Monroe County Division of Purchasing 39 West Main Street Room 200 Rochester, NY 14614 Email: swilcox@monroecounty.gov. All questions will be answered and documented in writing as an Addendum to the Bid. These will be sent out to all Bidders who received the original Bid no later than Wednesday, January 21, 2026. Monroe County intends to award the bid to the lowest responsive and responsible bidder, based on the TOTAL. Bidder must bid on all items in order to be considered. The County reserves the right to reject any and all bids if the Purchasing Manager deems said action to be in the best interest of the County.