Site work and paving for a mixed-use development in Lincoln, New Brunswick. Completed plans call for site work for a 0-square-foot, 0-story below grade transportation facility.

The works proposed under this proposal generally include: - Remove and salvage existing Runway 09-27 edelights, PAPIs, Windsocks, approach lighting and airfield guidance signs. - Remove and dispose off-site existing obsolete cabling, conduits, pullpits, edgelight stakes, and approach light towers. - Turn-over to the owner all salvaged fixtures. - Supply and install elevated airfield edgelighting equipment complete with new mounting stakes, new primary cabling in existing conduit, secondary conduit/cable, pullpits, retro-reflective rods and all accessories. - Supply and install new complete inset light assemblies including base can bottom sections, top sections, adjustment rings, snow plow rings, fixtures and all accessories. - Supply and install new PAPI fixtures on existing foundations complete with transition plates, pullpits, new primary cabling in existing conduit and all accessories. - Supply and install new windsocks on existing foundations complete with transition plates, pullpits, new primary cabling in existing conduit and all accessories. - Supply and install new RTIL fixtures on existing foundations complete with transition plats, pullpits, new primary cabling in existing conduit and all accessories. - Supply and install new SSALR fixtures with new towers on existing foundations complete with pullpits, transformer enclosures, new cabling, conduit and all accessories. - Provide all trenching, concrete encasement, backfill, and compaction associated with the airfield lighting equipment installation. - Provide all pavement coring, excavation and concrete encasement associated with the inset lighting equipment. - Supply and install airfield lighting power and control equipment in the Field Electrical Centre. - Provide all related electrical enclosures, chambers, pullpits, cabling, raceways and connections. - Provide temporary connections and work as necessary to accommodate the construction sequencing plans and maintain the operation of airfield lighting systems outside of the defined Work Areas. - Provide all other related work as specified and indicated on the Drawings and in the Specifications. The deadline for questions is Wednesday, January 28, 2026, at 5:00 p.m. local time. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform.