Site work for a municipal facility in East Lansing, Michigan. Completed plans call for site work for a municipal facility.

Proposal: We propose to furnish all labor, materials, equipment, tools and services required to complete the work in accordance with the specifications and conditions contained herein in consideration of the amounts stated below and agree that this document will constitute the Contract if accepted by the City of East Lansing. a The City of East Lansing is seeking a contractor to design, fabricate, and install a printed vinyl graphic face projection sign above (SCENE) Metrospace in East Lansing. Please see Attachment A for photos of the project area. 1. The contractor will design, fabricate, and install a double face projecting sign above the (SCENE) Metrospace storefront (110 Charles St, East Lansing). 2. Sign must be circular with a diameter of 32 inches, internally illuminated, with identical full color vinyl graphic faces on both sides. 3. Minimal design support using an existing vector logo will be required. 4. Sign should be mounted on the facia (below center) right of existing (SCENE) Metrospace signage, projecting twelve (12) inches. (Similar in placement to Georgio's projecting sign relative to its main sign.) 5. Sign must be manufactured and installed in accordance with Article 600 of the National Electrical Code and/or other applicable local codes. This includes proper grounding and bonding of the sign. 6. Contractor must provide electric to sign location by running a new circuit from (SCENE) Metrospace's panel in the back room of the gallery. Power will run up the wall, along the ceiling inside, outside of the building, and along the metal facia to the sign location (approximately 100 feet; See Appendix for pictures of panel). The ceiling along the proposed circuit path is open and unfinished, allowing accessible routing for electrical conduit and wiring. Surface mounted conduit is allowed but must be painted to match the surrounding surface. 7. Sign must be hardwired for control via both a manual switch located in the utility room and a photo sensor to enable dusk-to-dawn operation. 8. Contractor is required to obtain and pay for all necessary permits and inspections. - RFQ Questions are due by January 26, 2026 - Responses to all questions will be posted by January 29, 2026 ** bid date info : The subject line should clearly delineate that the message is a proposal submission and include the project name and name of the firm submitting the proposal.