Renovation of a water / sewer project in Florida City, Florida. Completed plans call for the renovation of a 6,000-square-foot water / sewer project.

Removal and replacement of the J.R. Dean WTP K-2 Building floor, Florida City, FL 33034. Questions and Clarifications Questions regarding this bid should be directed in writing via email to David Jackson, Purchasing Manager at djackson@fkaa.co GENERAL DESCRIPTION Provide all labor, materials, tools, supervision, and equipment necessary to remove existing rubber flooring and install a complete epoxy flooring system as specified herein. The new flooring shall provide a durable, non-slip, chemical-resistant, seamless finish suitable for use in a water utility facility environment. Mandatory sight visit prior to submitting bid. 2. ACCEPTABLE SYSTEM Manufacturer: Xtreme Polishing Systems System: Xtreme Polishing Systems- Epoxy Flake Flooring System (Heavy-Duty Industrial Epoxy) Finish Options: - Non-Slip additive (standard color option) - Enhanced Urethane Finish (alternate option) 3. PERFORMANCE REQUIREMENTS - Property | Requirement | Test Method | - Compressive Strength | = 10,000 psi | ASTM C579 | - Tensile Strength | = 1,500 psi | ASTM C307 | - Flexural Strength | = 4,000 psi | ASTM C580 | - Bond Strength | = 400 psi (failure in concrete) | ASTM D4541 | - Impact Resistance | = 160 in-lbs | ASTM D2794 | - Abrasion Resistance | = 0.1 g loss | ASTM D4060 | - Slip Resistance | = 0.6 (wet), = 0.8 (dry) | ASTM D2047 | 4. SYSTEM THICKNESS Flat floors: Minimum 3 mm total system thickness Stairs: Minimum 5 mm total system thickness with non-slip additive Mechanically grind and clean substrate to achieve ICRI CSP 3-5 surface profile. Patch and level as required. Verify moisture vapor transmission does not exceed manufacturer's limits. Apply moisture barrier and primer per manufacturer's instructions if required.