Renovation of a municipal facility in Brunswick, Georgia. Completed plans call for the renovation of a municipal facility.

The Board of Commissioners of Glynn County, Georgia seeks proposals from qualified firms to complete the modernization of the elevator with Alpha Elevator Control branded equipment, including all the details outlined and required in the Program Services section. Question Submission Deadline:April 22, 2026, 5:00pm HISTORIC COURTHOUSE ELEVATOR MODERNIZATION Quantity: 1 Capacity: 2500 Speed: 125 ft/min Openings: 4 Travel: 45 degrees Motion Control: NEW Power supply: NEW Logic Control: NEW Car Enclosure: RETAINED Signal Fixtures: NEW Doors: RETAINED Entrances: RETAINED Door Operation: NEW Pumping Unit: NEW Car. The existing car frame assembly will be retained. Car Enclosure. The existing cab enclosure will be retained Car Signature Fixtures. The existing car operating panel will be replaced with new. The panel will be constructed to meet ADA-AG requirements and ANSI A-17 A-2019 code Control & Drive Systems: The existing controller will be replaced with Alpha Elevator Control Branded equipment a state-of-the-art microprocessor-based control system. The system will be field programmable and will meet all requirements as outlined in the ANSI-A17 2019 code for elevators and escalators as well as all state and local codes Door & Entrances: The existing door operator will be modified with a new solid-state type featuring state-of-the-art closed loop feedback control. The closed loop feature allows for constant monitoring of the speed and location of the doors during any position of travel, providing smooth and consistent opening and closing motion. In addition to the operator all mechanical linkages and clutch assemblies will be replaced. The car door will be retained and replaced. The existing mechanical door reversal device will be replaced with an infrared device that will reverse the door without requiring physical contact with the door. The existing hoist way elevator door frames will be retainedHall Signal Fixtures: Furnish and install new surface mounted hall fixtures at all landings. These hall fixtures will be #4 bronze finish and will have all necessary requirements for local fire code. New hall position indicators will be installed within the fixture using a 1" display indicating which floor the elevator is located on Machine & Motors: The pumping unit will be replaced and will be equipped with state of-the-art pumping unit that will include new motor, pump, hydraulic valve, and muffler type motor that will greatly improving the overall performance of the elevators. Pit Equipment: The existing pit equipment will be removed from the pit. The jack and piston will be retained. Wiring: All control wiring where required will be replaced to meet all NEC code requirements