Remodeling of an educational facility in Columbia, Missouri. Completed plans call for the remodel of a educational facility.

The Columbia Public Schools is accepting sealed bids for the Dish Machine Replacement. Information about the instructions and requirements for procuring bidding documents can be viewed and downloaded online. All documents must be obtained from this site to be an eligible bidder. A mandatory pre-bid meeting is scheduled, and contractors must attend to access project areas. Bidders that do not attend the pre-bid meeting will not be allowed to submit a bid. All contractors and subcontractors must conform to state labor standards and the Missouri Prevailing Wage Law, if applicable. The owner reserves the right to reject any or all bids and to waive informalities or irregularities in the bidding. 5. When a brand is specified, alternates will not be accepted. 6. Used or refurbished equipment will not be accepted. 7. Contractor responsible for equipment installation, field wiring dishwasher, disposal, and booster heater. 8. Contractor responsible for any necessary HVAC Work: modify exhaust, remove fan, install wall fan, ductwork modifications. This shall include any necessary modifications to widen the opening to accommodate the new ductwork. 9. Contractor responsible for removal and disposal of existing equipment, and delivery and set in place for final connections. 10. Proposals must include all costs. Equipment Item 1 – Dish Sorting Shelf (Qty: 1) Custom fabricated dish sorting shelf. Field measurements required. Item 2 – Soiled Dishtable (Qty: 1) Custom fabricated “L” shaped soiled dish table (#002). Field measurements required. Item 3 – Pre-Rinse Faucet Assembly (Qty: 2) Krowne Royal Series wall-mounted pre-rinse assemblies with accessories and warranty. Krowne Model 17-108WL Dimensions: 35(h) Krowne Royal Series pre-rinse Assembly, wall mount, 8" centers, spring action flexible gooseneck, 35"H stainless steel hose with 15" overhang & 1.2 GPM spray head, built in check valves, includes wall bracket & mounting kit, chrome plated brass base, low lead compliant, includes internal check valves to prevent backflow & cross contamination, NSF (interchangeable with most brands) (ships pre-assembled) Must include standard 3-year warranty and 1Model 21-136L Krowne Royal Series Pre-Rinse Hose, 96", with grip, flexible stainless steel, low lead compliant (interchangeable with most brands) Item 4 – Disposer (Qty: 1) Salvajor 2 HP disposer system with controls and support leg. Salvajor Model 200-SA-6-ARSS-LD Disposer, Sink Assembly, 6-1/2" sink collar, 2 Hp motor, start/stop push button, drain/flush/time delay, automatic reversing & water saving with safety line disconnect ARSS-LD control, includes fixed nozzle, chrome plated vacuum breaker, solenoid valve, sink stopper & flow control, heat treated aluminum alloy housing, UL, CE 208v/60/3-ph, 6.6 amps Model LSA8 Disposer support leg, for 3/4 HP - 2 HP disposers Item 5 – Conveyor Dishwasher (Qty: 1) Champion 54 PRO rack conveyor dishwasher with accessories, 480v/3-phase. Champion Model 54 PRO Dimensions: 54(w) Pro Series, 54”W rack conveyor dishwasher, Proportional Rinse, Progressive anti-jam drive system, top mounted control panel with HMI user interface, Proactive maintenance software, 100 gallons per hour with energy sentinel (idle pump shut-off), (255) racks per hour, single-piece stainless steel upper & lower wash arms manifolds, single removable scrap screen per tank, 20” standard vertical clearance which accommodate 18” x 26” sheet pans, full 180° opening leak proof insulated hinged access doors, automatic tank fill, door safety switches, leak-proof ball valve drains, lower front & side enclosure panels, stainless steel heavy gauge construction For inquiries or questions about the bid or specifications, please contact the following: 1. Bid procedures and format - Ms. Lisa Ozanich, Assistant Purchasing Agent Email: lozanich@cpsk12.org All questions or requests shall be submitted in writing/email prior to the bid closing. Replies may be issued by addendum.