Site work and paving for a road / highway in Berea, North Dakota. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Proposed Work Consists of 23.2730 Miles of Milling & Rap-hot Mix Asphalt Overlay Located Cmc 0211, Jct Nd 46 N to Sanborn And Involves Approximately: 1 L Sum Contract Bond; 1 L Sum Railway Protection Insurance; 1 L Sum Railroad Coordination; 1745 Cy Common Excavationsubcut; 1164 Cy Subcut Aggregate; 286 M Gal Water; 44.5 Mile Shoulder Preparation; 1540 Ton Aggregate Surface Course Cl 13; 40989 Gal Tack Coat; 16445 Gal Fog Seal; 319285 Sy Milling Pavement Surface; 49971 Ton Rap - Superpave FAA 43; 246 Ea Cored Sample; 1164 Ton Patching; 2812 Ton Pg 58s-34 Asphalt Cement; 1 L Sum Mobilization; 800 Mhr Flagging; 2365 Unit Traffic Control Signs; 2 Ea Portable Rumble Strips; 288 Ea Tubular Markers; 400 HR Pilot Car; 1 Ea Bituminous Laboratory; 1 Ea Contractor's Laboratory; 5236 Sy Geosynthetic Material Type R1; 1 Set Rumble Strips - Intersection; 265 Sf Pvmt Mk Painted-message; 149130 Lf Short Term 4in Line-type Nr; 49710 Lf Pvmt Mk Painted 6in LINE. Bid Range $5,000,001 to $5,500,000 Prequalification is required for all bidders submitting a bidding proposal form. Prequalification is required annually. Prequalified contractors who wish to renew their prequalification must submit a complete "Contractor's Prequalification Statement" by July 1 of each calendar year. Bidders who are not currently prequalified must submit a complete "Contractor's Prequalification Statement" at least 10 business days prior to the date of the bid opening. Information is available from the Construction Services Division of the North Dakota Department of Transportation. Contractor's License--A contractor is not required to have a license from the state of North Dakota before bidding on any project, however, no contract will be awarded unless said contractor holds a current North Dakota license in the class within which the value of the contract falls. The right is reserved to reject any and all proposals, to waive technicalities, or to accept such as may be determined to be for the best interests of the state. NDDOT - 24911 - Milling & Rap-Hot Mix Asphalt Overlay - CMC 0211 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.