Site work and paving for a mixed-use development in Tacoma, Washington. Completed plans call for site work for a 6,200-square-foot sidewalk / parking lot; for paving for a sidewalk / parking lot; and water / sewer project.

The work required for this project includes: demolition and removal of approximately 6,200 square feet of existing gravel and asphalt pavement; subgrade preparation and grading, pavement sawcutting and trenching for the new stormwater treatment system; procurement and installation of the stormwater treatment system; installation of approximately 6,200 square feet of new asphalt pavement; procurement and installation of security fencing and LED lighting fixtures with controls; and protection of all existing utilities. Each bid must be accompanied by a bid security in an amount equal to five percent (5%) of the base bid in a form allowed by the instructions to bidders. Bidders may contact the Department of Labor and Industries, Specialty Compliance Services Division, Apprenticeship Section to obtain information on available apprenticeship programs. Fifteen percent (15%) apprenticeship participation is required for certain projects estimated to cost one million dollars or more. If fifteen percent (15%) apprenticeship labor hours is met, the contractor will receive an incentive fee of $1,000. If less than fifteen percent (15%) apprenticeship labor hours is used, a $500 decrease in the total contract amount will be taken for not meeting the required apprenticeship labor hours. L&I will monitor apprenticeship labor hours. Questions may be submitted to the Procurement Department through the Procurement and Question Submission Portal, with instructions found in the portal instructions. Questions will not be accepted after seven (7) days prior to the bid date. Plans, specifications, addenda, and plan holders list for this project are available online through The Port of Tacoma's Website. Bidders must subscribe to the Holder's List to receive automatic email notification of future addenda and to be placed on the Holder's List. Additional instructions are available in Section 00 2100-Instructions to Bidders. QA date - 5-28-2026 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.