Renovation of a laboratory facility in Port Orchard, Washington. Completed plans call for the renovation of a laboratory facility.

R10 Lab: Type 2 Water Purifier System The period of performance of this contract shall be from 6/1/2026 through 9/1/2026 Delivery/Installation Address: USEPA Region 10 Laboratory 7411 Beach Drive East Port Orchard, WA 98366 Office phone# 360-871-8700 Set Aside: Total Small Business Set-Aside Project Officer/Invoice Approver: Jennifer Leider; leider.jennifer@epa.gov; 360-871-8765 Delivers Ultrapure Water (Type 1) at Flow Rate : 0.05 to 2 liters/minute. Ultrapure Water (Type 1) Flow rate control: Adjustable at point of use from 0.05 to 2 liters/minute. The water purification unit will have a built-in resistivity meter and TOC monitor. Ultrapure Water Resistivity: 18.2 M.cm at 25C. The on-line water product resistivity meter will be built following the ASTM recommendations. Able to pass the USP suitability test for resistivity meters. TOC: < 2 ppb with on-line TOC monitoring display No particles with size >0.22 um Certificates of calibration for both the resistivity meter and the TOC monitor are delivered with the water purification system. Water purification cartridges will have a built-in labeling for traceability of consumables. Has an integrated data management system that stores all data in system memory and can provide reports on dispensing events with water quality results. System must be wall mounted. Must be able to plug into a 110 volt, 60 hz, 15 amp receptacle for power. Installation and travel included in purchase. Minimum 1 year warranty on parts and labor.