Site work for a playground / park / athletic field in Steamboat Springs, Colorado. Completed plans call for site work for a playground / park / athletic field.

Reference Number 0000425299 The City of Steamboat Springs, hereinafter referred to as the city, is soliciting proposals from qualified contractors to provide professional services for the installation, programming, and service related to a comprehensive irrigation system replacement at Emerald Park in Steamboat Springs, Colorado, hereinafter referred to as the Project (Exhibit A). The contractor will be responsible for removing the existing irrigation system and providing all materials, labor and equipment necessary to install a new irrigation system. The city has prepared an in-house design of the proposed irrigation system which will retain the existing points of connection (POC) to the backflow prevention (BFP) equipment and the raw water supply from the Yampa River pumphouse. The new system will be constructed fully with fused high-density polyethylene (HDPE) mainline and lateral line piping. The new in-ground components will be integrated into the existing Hydropoint/Baseline control platform, hydrometers and additional sensors. The Project's scheduling, phasing, reclamation and timely completion is crucial to minimize conflicts with other active projects in the park and to ensure the park is ready to be reopened in the spring of 2028. Question Deadline 06/04/2026 at 5:00 PM MT Questions are submitted online Yes - Bid Bond 5 % - Performance Bond 100 % - Payment Bond 100 % . The following is a limited summary of the work for the Project: 1. Main Irrigation Line: Approximately 3,800 linear feet of 4" and 6" diameter fused highdensity polyethylene (HDPE) pipe to supply park irrigation. Main line pipe to be buried at a depth of 24" to top of pipe (HDPE), to be installed via rubber track excavator or rubber tire trencher. 2. Lateral Irrigation Lines: Approximately 12,000 linear feet 1.5" to 3" diameter buried to a depth of 18" to from top of pipe, high density polyethylene pipe (HDPE), to be installed via rubber track excavator, rubber tire trencher and/or rubber tire vibratory plow. 3. Water Supply P.O.C.'s: Re-use of the existing raw water pump station at the southwestern corner of the park and the existing potable water backflow on the north side of the park adjacent to Pamela Lane. The Contractor will connect to the existing points of connection (P.O.C.'s) where shown in the irrigation plan set. Refer to irrigation legend and P.O.C. notes for additional information. 4. Mainline Isolation Valves: 11 Clow C509 gate valve using Harco PJ connection, sized to mainline pipe. (see detail drawing in plan set) 5. Lateral Isolation Valves: 1, 2" square nut operating valve, stainless steel body and grip ring. 6. Two-Wire Path: Approximately 4,300 linear feet #14 AWG Regency R7072D buried parallel to mainline. (refer to detail drawings) 7. Approximate Sprinkler Equipment Quantity: (122) large radius I-40 rotors, (95) large radius opposing nozzle I-40 rotors, (52) electric control valves 2", (4) electric drip valve assemblies, (1) lateral isolation valve, (11) mainline isolation valves, (9) quick coupler valves 1", (1) quick coupler valve 1-1/2", (6) Baseline moisture sensors, (2) air/vacuum release valves, and (4) coach's buttons for infield irrigation activation. 8. Full Scope of Work and Project Specifications are found in Appendices A and B, which contain the Design Plans & Technical Specifications.