Renovation of a museum in Browning, Montana. Completed plans call for the renovation of a museum.

Provide and install a security camera system for the Indian Arts and Crafts Board. Work includes furnishing all labor, materials, equipment, and services necessary to install cameras and associated components to support video monitoring, ensure proper system operation, and deliver a complete and functional security solution in accordance with applicable requirements. PERIOD OF PERFORMANCE: All work shall be completed by September 30, 2026. Upon award, the contractor shall coordinate with the COR and the onsite Curator to schedule installation activities. All installation work shall be performed Monday through Friday, between the hours of 7:30 a.m. and 6:00 p.m. PLACE OF PERFORMANCE: Work will be performed at the Museum of the Plains Indian, 19 Museum Loop, Browning, Montana 59417. The IACB, MPI requires additional cameras to be added to its existing security monitoring system to allow museum staff to monitor current blind areas in the interior and exterior of the museum. The selected vendor shall provide and install new security cameras adhering to the specifications provided in this statement of work. o Cameras will be placed in locations as noted on the map in Attachment 2 (Map to be provided at time of Award). o A total of 14 cameras are to be added. The vendor shall select cameras that provide maximum area coverage. Cameras must be Performance 2MP IP MFZ Mini Dome Camera or an equivalent model and must function with the existing camera system. o An additional Network Video Recorder (NVR), minimum 24-port is required to support the new cameras. o The vendor shall provide all miscellaneous wires, cabling, and related materials necessary to complete the installation. The are currently 17 cameras installed in the locations noted in Attachment 2. Those cameras shall remain in place. The existing cameras installed at the museum are Turing TP-MFM4M28 4MP HD TwilightVision IR Mini Dome Camera. All newly installed cameras and any additional NVR equipment must be fully compatible with, and operate seamlessly alongside, the existing MPI cameras and existing 32-Channel Smart Series Performance NVR (with Turing Vision Bridge and 24-Port Gigabit PoE+ Switch). The contractor is responsible for ensuring full system compatibility. The cameras and all components of the system must be NDAA COMPLIANT. All camera options must include night-vision capability. All cameras are to be fixed-position, no Pan Tilt Zoom (PTZ) cameras are to be used in the system. The cameras are to be placed in the locations indicated on the maps in Attachment 2. Before cameras are physically installed, the vendor must discuss and confirm locations with the onsite Curator to ensure maximum coverage of the area. The onsite Curator must give final approval on camera locations. Cameras must be placed at the entrances and exits of the museums in such an orientation that ensures that the faces of individuals entering/exiting the museum are captured by the security camera system. Due to the nature of the building and the masonry walls at the Museum of the Plains Indian, cabling can only be run through walls in limited areas. Any new penetrations to the walls must be approved by the COR or onsite designee before they are performed. The cabling will have to be on the exterior of the walls and shall be in a conduit. The contractor may reuse existing cabling from the previous system provided it is in good condition. Potential vendors can schedule a site visit of the museum, but a site visit is not required to submit a bid.