Site work and paving for a road / highway in Cicero, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Sealed bids will be accepted for the asphalt reconstruction and shouldering of Cicero Road and Kasperek Road. Road to be pulverized , graded , shouldered and re - paved is Cicero Road from State Hwy 47 East to Old Hwy 47 , as marked . The Cicero Road project would be 5175 feet long and 20 feet wide with a 1-foot shoulder on each side . PULVERIZING AND GRADING - The Town of Cicero will be accepting proposals for asphalt pulverizing and grading . Road surface will be pulverized at a depth of twice the thickness of the existing asphalt . Pulverizing will be at a width of 1 foot wider than the existing asphalt on each side to include shoulders , for a total width of 22 feet . Existing asphalt is to be sawed on both ends of road as marked . Any asphalt driveways will be saw cut as marked . Pulverized material shall be rolled with a sheep's foot roller for the purpose of compacting material and breaking up larger pieces of asphalt which may exist after grinding . Pulverized material shall be graded to proper cross slope for new asphalt pavement . After grading is complete , road base shall be compacted with a finish roller . Approximate date for work to begin shall be determined with input from the town . PAVING - The Town of Cicero will be accepting proposals for asphalt paving on pulverized , compacted millings . Pulverized road must be fine graded prior to paving . Base mat of asphalt will be paved 20 feet wide at a thickness of 1 1/2 inches after compaction . Base mat of asphalt shall be allowed to set for a period of time not less than 24 hours before applying finish mat . Finish mat could be applied the same day as the base mat with Town approval . Road shall be swept if needed , and dry , with tack applied before finish mat of asphalt is paved . Tack must be allowed to break before finish mat is applied . Finish mat shall be paved 20 feet wide at a thickness of 1 1/2 inches after compaction . Base mat and finish mat shall be rolled to proper compaction , for maximum pavement life . Placement of asphalt will be done with a full width screed on paver or two pavers will be used side by side as to not have a center seam or cold center seam on road . If two pavers are used , they must not be more than 100 feet apart during paving . Asphalt pavement shall be extended 18 inches beyond road width by all driveways . Paving will be done with end shoes on screed in the down position for even compaction across mat .