Site work and renovation of a water / sewer project in Oswego, Illinois. Completed plans call for the renovation of a water / sewer project; and for site work for a water / sewer project.

Well Station Fencing Upgrades Bid Bond 10% Bid Bond required with the bid submittal Questions regarding this legal notice or the proposal package must be in writing and emailed directly to bids@oswegoil.org until July 3, 2026, at 9:00 AM local time. Responses will be posted on DemandStar by July 7, 2026, at 3:00 PM local time Scope of Work o Provide labor, material, equipment, related services, and supervision for the removal and disposal of existing fences and trees as designated by the plans. o Provide labor, material, equipment, related services, and supervision for the installation of Montage II Classic with Transport Traverse Gate by Ameristar Fence Products, Inc per manufacturer specifications. o Provide 4" topsoil, seeding, erosion control excelsior blanket, and care of grass during establishment period for all areas disturbed as a result of construction. o All work must be completed by October 31, 2026. 3. Work Location o Well #3 - 340 S. Madison Street, Oswego, IL 60543 o Well #4 - 401 Chicago Road, Oswego, IL 60543 o Well #6 - 245 Lennox Drive, Oswego, IL 60543 o Well #8 - 3700 Grove Road, Oswego, IL 60543 o Well #9 - 700 Yoakum Boulevard, Oswego, IL 60543 o Booster Station #2 - 1580 US-34, Oswego, IL 60543 4. Product and Execution Specifications o Install ornamental fences and gates by experienced fence erectors and in accordance with manufacturer's recommendations. o Product a. Fence to have overall height of 96-inches above grade. b. Steel material for fence panels and posts shall conform to the requirements of ASTM A653/A653M, with a minimum yield strength of 45,000 psi (310 MPa) and a minimum zinc (hot-dip galvanized) coating weight of 0.90 oz/ft2 (276 g/m2), Coating Designation G-90. c. Material for pickets shall be 1" square x 14 Ga. tubing. The rails shall be steel channel, 1.75" x 1. 75" x .105". Picket holes in the rail shall be spaced 4.715" o.c. d. Gates to be cantilever style slide gates with a minimum gate opening of 12-feet with travel right to open (from outside looking inward) along a single track. Gate hardware provided by the gate manufacturer and installed per the manufacturer's recommendations. e. The manufactured fence system shall be capable of meeting the vertical load, horizontal load, and infill performance requirements for Industrial weight fences under ASTM F2408.