Renovation of a military facility in Fort Bliss, Texas. Completed plans call for the renovation of a military facility; and military facility.

Install a kitchenette in Building 2472, including all labor, materials, equipment, supervision, and related construction services necessary to complete the project. The contractor shall provide continuous onsite supervision through a superintendent who is employed directly by the prime contractor and present whenever work is being performed. All required work shall be coordinated and performed simultaneously in accordance with the project requirements. The resulting contract will be a firm-fixed-price construction contract. Location: Building 2472, Fort Bliss, 1744 Victory Avenue, Fort Bliss, TX 79916. THE ESTIMATED MAGNITUDE OF CONSTRUCTION FOR THIS PROJECT IS BETWEEN $250,000. AND $500,000. All questions and requests for information (RFI) must be received NO LATER THAN 6 August 2026 at 1:00 PM MST. BIDDERS ARE STRONGLY ENCOURAGED TO SUBMIT QUESTIONS EARLY IN THIS PROCESS. **After the due date no additional RFI's will be answered** *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The scope of work for this project on the first floor includes the installation of a new kitchenette including new finished metal stud walls to deck, removal and replacement of ceiling tiles, new base and wall cabinets, countertops and tile backsplash, new resilient wall base, removal and replacement of mini blinds, new plumbing work above the ceiling and below the floor to the basement for new sink faucet and waste disposal, new range hoods through wall exhaust duct and vent, new electrical panel, wiring and conduit. Work on the second and third level existing kitchenettes includes sanding and staining of existing wall and base cabinets, new cabinet hardware, new countertops, removal and replacement of mini blinds, removal and replacement of kitchen sink, faucet, new waste disposals, removal and replacement of electric drinking fountains with bottle filler, removal and replacement of resilient wall base and new paint. The Contractor shall provide all work, labor, materials, related fees, and related services for construction requested herein until completion and acceptance of the entire work, except for any completed unit of work which may have been accepted under the contract, by the Government in a professional and collaborative environment to sustain mission requirements. Construction services and finished products shall be delivered on schedule, safely, and compliant with regulatory codes and standards. Asbestos and Lead Surveys were conducted June 2008 at Building 2472. The Asbestos Survey identifies Asbestos Containing Materials (ACM), and the Lead Survey identifies Lead Based Paint (LBP). Contractor to review the attached Environmental Review Form for specific environmental comments about this project. Review the attached surveys for all Asbestos and lead-containing materials to verify if they will be impacted by this project. If the project scope includes disturbing Asbestos or lead-containing materials, work must be conducted by a Licensed Abatement Company. If additional materials, not tested in these surveys, need to be disturbed, they must first be tested for Asbestos and lead. Contact DPW-Environmental Division for additional testing.