Site work and paving for a road / highway in Littleton, Massachusetts. Completed plans call for site work for a road / highway; and for paving for a road / highway.

*The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com. The scope of work consists of milling approximately 25,200 square yards of bituminous concrete road surface, adjustment of castings, sweeping of streets, approximately 1,750 LF of monolithic asphalt berm, tack coat and supplying and placing approximately 3,500 tons of bituminous concrete pavement in a leveling and finish course and related work in preparation of paving. Grimes Lane, Bulkeley Road, Adams Street, Conant Street, Washington Drive, Sheridan Lane: Mill existing surface 2 inches Sweep Street Repair areas that milled through (as directed by Highway personnel and as needed) Apply tack coat Place leveling course ( 1 inch on centerline, drag edges 1 foot off EOP) Adjust castings Apply tack coat Place 1.5 inch top course and monolithic asphalt berm (if any) Cap or replace driveway caps as needed and as directed by Highway personnel Littleton Electric Light and Water Department front Parking lot (39 Ayer Road): Mill existing surface 2 inches- Repair any areas milled through (as directed by Highway personnel and as needed) Adjust structures Apply tack coat Place 2 inches of top course and monolithic berm Questions will be accepted until Friday, August 14, 2026, at 11AM. All questions related to the specifications shall be directed to: Stephen Jahnle Director of Public Works. sjahnle@littletonma.org 39 Ayer Road Littleton, MA