Site work and renovation of a fire / police facility in Arlington Heights, Illinois. Completed plans call for the renovation of a fire / police facility.

Roof replacement and installation of fall protection systems at the Fire Training Center. Bonds: 10% Bid Bond, Certified Check required. All questions shall be submitted in writing to both Scott Goehring: sgoehring@garlandind.com and John Giannetti jgiannetti@vah.com VIA email only according to bid sheets. No questions will be accepted verbally. Questions due September 7th 2026 before 12:00pm This work consists of design, fabrication , supply, installation , and testing of new fall protection equipment to Be installed at various structures within the project site. The work is shown in drawings r-001 through r-102. The following summarizes the specific items included in the scope: A. All new fall protection equipment 1. Design fall protection equipment to meet the performance requirement specifications of this document As well as applicable building codes and OSHA/ansi standards. B. Guardrails 1. Supply and install safety guardrails along roof perimeter including the following approximate total Linear feet quantities by structure: A. Structure a (72 feet) B. Structure b (58 feet) C. Structure c (86 feet) D. Structure d (133 feet) 2. Perform roofing repairs and flashing of mounting bracket roof penetrations as required for Guardrail installation . C. Grab post 1. Supply and install safety grab post to top of ladder at roof hatch of structure a. D. Anchorages 1. Fabricate, supply and install two (2) fall protection anchorages at roof of structure a. 2. Perform roofing repairs and flashing of anchorage roof penetrations as required for anchorage Installation . 3. Load test new anchorages according to engineer's protocols outlined herein.