Renovation of a financial development in Camrose, Alberta. Completed plans call for the renovation of a financial development.

Camrose AFSC Building 2nd Floor Kitchen Restoration Project Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform. Question Deadline 11/12/2026 at 4:30 PM MT Questions are submitted online 1. Hazardous Materials Abatement (to be completed first) . Identify, safely remove and properly dispose of hazardous materials present within the affected areas prior to any demolition or restoration work. Provide containment, negative air / air monitoring, removal, handling, transportation and disposal in accordance with the Alberta OHS Code, Alberta Asbestos Abatement Manual and all applicable environmental requirements. Abatement work to be carried out by a qualified abatement contractor; provide worker certifications, notifications (Notice of Project where required), waste manifests and clearance / visual inspection reports on completion. Hazardous materials assessment report(9212HAZ01KH ) to be provided by Edon Management at the end of this RFP. All Cascade Environmental Reports attached to this bid document are for reference only. Bidders are to base their price on the items identified in that report. Leave all abated areas clean , safe and ready for subsequent repair work. 2. Kitchen Cabinet Repair and Restoration (2nd Floor Kitchen). Repair and restore the kitchen cabinets affected by water damage. Inspect cabinets and surrounding areas (walls, backsplash, countertop substrate) for moisture-related damage and report findings to the Project Manager before proceeding. Remove and replace damaged cabinet components (boxes, gables, kick plates, shelving) as required; repair or re-secure cabinet doors, drawers and hardware. Restore affected surfaces to match the existing cabinetry in material, colour, profile and finish. Clean the work area and dispose of all damaged materials upon completion. 3. New Sink and Faucet/Tap Assembly (2nd Floor Kitchen). Supply and install a new sink and faucet/tap assembly in the designated area. Remove and dispose of existing fixtures; prepare the countertop / cabinet opening as required. Install new stainless steel sink and commercial-grade faucet; connect to existing water supply and drainage lines, including new supply stops, P-trap and tailpiece as required. Seal around the sink; test all connections for proper operation and leaks; clean the work area . Sink and faucet selection to be submitted to the Project Manager for approval prior to ordering. 4. New Vinyl Flooring (2nd Floor Kitchen / Designated Area). Supply and install new vinyl flooring in the designated area. Remove existing damaged flooring as required; prepare and level the subfloor and repair minor surface deficiencies. Install new commercial-grade vinyl flooring per manufacturer's specifications, including underlayment, transitions, base and trim as required. Ensure all seams and edges are properly secured and the finished flooring is clean, level and free of defects. Flooring product and colour to be submitted to the Project Manager for approval prior to ordering. 5. Ceiling Drywall Repair (Upper Crawlspace). Repair and restore water-damaged ceiling drywall in the upper crawlspace. Remove damaged drywall and any affected materials; inspect the area for moisture or additional damage and allow it to dry completely (moisture readings to be documented) before closing in . Repair any underlying issues identified; install new drywall, tape, finish and sand the joints, then prime and paint to match the existing ceiling. Clean the work area and dispose of all damaged materials upon completion. 6. Wood Framing Repair (Upper Crawlspace). Repair and restore water-damaged wood framing in the upper crawlspace. Inspect framing for moisture damage, rot, deterioration or loss of structural integrity and report findings to the Project Manager before proceeding. Remove and replace damaged wood members as required; reinforce or re-secure framing where necessary. Allow the affected area to dry thoroughly before completing repairs. Restore the framing to a safe and serviceable condition; remove damaged materials and clean the work area upon completion. 7. Basement Dirt Floor Remediation. Address and repair the existing dirt floor in the basement. Remove loose or unsuitable soil (4" to 6"and debris; grade and level the floor surface; address any areas affected by moisture or water infiltration. Conduct cleaning of concrete foundation walls and enzyme treatment (or other appropriate application) of soil floor. Replace removed soil, as required. Where required, supply, place and compact appropriate fill material to provide a stable, clean and level base.