Demolition, site work, paving and new construction of a mixed-use development in Roaring Bk Tp, Pennsylvania. Completed plans call for the demolition of a bridge / tunnel; for the construction of a bridge / tunnel; for site work for a bridge / tunnel; and for paving for a bridge / tunnel.

The Project Consists of Replacement of the Existing Stone Masonry Arch Culvert Carrying Sr 307 Over Stafford Meadow Brook With Approach Roadway Improvements. The Proposed Structure Will Be Single Span Prestressed Concrete Spread Box Beam Bridge With Four 11 Foot Lanes and 8 Foot Shoulders. Other Work Includes Roadway Approach Pavement Reconstruction and Shoulder Widening, Guide Rail Replacement, E&s Control Measures, Signing and Pavement Marking, Existing Structure Removal, and Other Miscellaneous Construction Work. Construction of the Sr 307 Bridge Will Be Completed Using Staged Construction While Maintaining One Lane of Traffic in Each Direction. Additional Work Includes Two Driveway Relocations and Mill and Overlay of Sr 307 at the Project Extents, as Indicated on the Approved Drawings Included in the Bid Package for State Route 307, Section D53, in Lackawanna County, Roaring Brook Township From Approximately 4.4 Miles North of Sr 690 at Nb Segment 0150 Offset 1147 to Approximately 2.4 Miles South of Interstate I-81 at Segment 0180 Offset 1340. Project Cost Range: $2,500,000.00 - $4,999,999.99 Federal Project Status: PENNDOT Oversight Non-NHS DBE: 0% Structure Work: 33.00% Pre-bid Meeting: None Anticipated NTP: 08/31/2026 Wage Rates: Yes Required Completion: 09/27/2028 Prequalification Requirement: Yes State Type of Work: Bridge Replacement Responses to questions on this page are for informational and clarification purposes. Official changes to the proposal will be made via an Addendum. The deadline for submitting questions is 72 hours before the let date and time. For Emergency projects, the deadline is reduced to 19 hours before the let date and time. PADOT - SR 307 Over Williams Bridge Reservoir *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.