Demolition, site work, paving, renovation and addition to a mixed-use development in Central Point, Oregon. Completed plans call for the addition of a municipal facility; for the demolition of a municipal facility; for site work for a municipal facility; for the renovation of a municipal facility; sidewalk / parking lot; for paving for a sidewalk / parking lot; and water / sewer project.

This is a REBID of constructing a new office addition to the existing ODOT Central Point Maintenance Facility in Jackson County. Please note revised plans, specifications and completion dates. Project Location: 4141 Hamrick Road, Central Point, Oregon Addition of a new office at the existing Central Point Maintenance Station including exterior demolition, site work, utilities, paving, striping, stormwater facilities, plantings, selective demolition in the existing Maintenance Station building, concrete slab on grade, construction of new exterior walls, windows, doors, metal siding and roof panels, mechanical systems, interior doors, walls, finishes, plumbing, and other Work as indicated in the Contract Documents. Substantial Completion date is June 15, 2023 The final completion date is June 30, 2023 add alternate #1 furnish and install gypsum board at underside of roof trusses throughout. furnish and install attic access hatch. tape as noted in specification section 092900 gypsum board. add alternate #2 furnish and install hvac system (if add alternate #6 is not selected, hvac equipment must be located according to the dimensions on the plans). add alternate #3 furnish and install glass fiber blanket insulation in exterior walls, mineral-wool sound attenuation blankets in interior walls and pneumatically applied loosefill mineral fiber insulation in ceilings. add alternate #4 furnish and install gypsum board throughout at walls and ceiling in locations shown on sheet a102 reflected ceiling plan and associated finishes as shown on sheet a112 interior finish schedule. furnish and install framing and gypsum board in existing office area. tape, texture and paint according to the interior finish schedule and as noted in specification section 092900 gypsum board. add alternate #5 furnish, install and finish all interior doors, frames and trim. add alternate #6 furnish and install acoustical ceiling grid and tile as shown on sheet a102 reflected ceiling plan and associated finishes as shown on sheet a112 interior finish schedule. add alternate #7 furnish and install interior flooring and wall base as indicated on sheet a112 interior finish schedule. add alternate # 8 furnish and install all plumbing fixtures, water heater, instant hot, ada components, and toilet room accessories. furnish and install all casework, wood trim and blinds throughout. paint exposed wood surfaces per sheet a112 interior finish schedule add alternate #9 furnish and install flagpole as shown on sheet c103 enlarged site plan