Site work, renovation and addition to a municipal facility in Saint George, South Carolina. Completed plans call for the addition of a 4,508-square-foot, one-story above grade municipal facility; for the renovation of a municipal facility; and for site work for a municipal facility.

The Project consists of construction of an approximately 4,508 square-feet, one-story operations building and renovations to the Water Department. Project Location: 104 Raysor Street, St. George, SC 29477. The Owner reserves the right to reject any or all bids. Federal Wage Rates do apply The scope of work includes, but is not limited to the following: Construction of an approximately 4,508 square-feet, one-story operations building incorporating open storage bays and an enclosed maintenance bay with vehicle lift. Metal framing, aluminum storefront and glazing, some interior framing, ADA accessible toilet room, building mechanical and electrical systems, related site improvements, earthwork and grading, utility connections work and concrete foundations. Also included will be renovations to the existing historical Water Department that is located at 104 Raysor Street, St. George, SC and sits on approximately .73 acres. The building is 2-story with a total square footage of approximately 3,592. This project will only be addressing the first level for renovation of approximately 1,764 square feet. The design intent, at this time, is to renovate only the first level of the building while maintaining its historical integrity by modifying to comply with current building Codes, re-working interior spaces to make more "workplace" friendly for day-to-day operations and provide ADA compliant public access. The renovated building will house the new SCADA workstation and system operations while a permanent standby generator will be provided for in the event of an emergency. Demolition of the interior spaces on the first level will include, but not limited to, removal of all existing plumbing fixtures, non-load bearing interior walls, doors and frames, wall finishes (paneling), cabinets, ceiling systems, miscellaneous trim work, concrete and wood steps, portions of existing concrete slabs, existing mechanical system and related components, lighting fixtures, wiring, conduit, boxes and controls...etc. The intent for the first level will be to provide more efficient office and public accessible space. The renovation will consist of the construction of new ADA compliant toilet rooms with both accessible from only the inside of the building. A new lobby area with an ADA accessible ramp provided to assist in entrance to the building, three new offices spaces, two break rooms, new flooring and ceiling systems. New efficient LED lighting will be provided in a new ACT ceiling system throughout. PROJECT NO.: 20170199