Site work and paving for a mixed-use development in Rhinelander, Wisconsin. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

For RHI Parking Revenue Control System The work includes improvements to the passenger parking lot including new access control arms and ticket dispensers, associated revenue control hardware/software, new/relocated light poles and fixtures, fences and protective concrete barriers, signage, parking striping, and miscellaneous site utilities. The scope of work shall include all work, including all labor, materials and equipment, testing required to install a complete electrical system as indicated in the project Manual. The Project Manual consists of the bidding documents, the contract, specifications, contract drawings and all subsequent addenda and modifications. The contractor shall furnish and install all necessary materials, apparatus and devices to complete the electrical equipment and systems installation herein specified, except such parts as are specifically exempted herein. All work items shown on the drawings is within the scope of work and shall be provided as indicated. Only items that are clearly indicated as being provided by others or under a separate contract shall be out of scope. In general, the specifications indicate the requirements and quality for products required and the executions for those products. Only items that are clearly indicated as being provided by others or under a separate contract shall be out of scope. If there is any discrepancy between the drawings and the specifications, it is the contractor's responsibility to notify the Engineer for resolution, prior to procuring equipment or starting work. Coordinate and verify all equipment being supplied by equipment supplier and other trades. Verify equipment size, motor HP, dimensions, locations, etc. as all are subject to change. Contractor shall verify all building components (door swing, ceilings, walls, etc.) and equipment (HVAC motors, control panels, cabinets, etc) before installing electrical equipment, fixtures, outlets and conduit. The Contractor shall provide all plywood backboards and supports for all electrical equipment as indicated on the drawings and as required or specified. All permits and inspection fees required to complete the work shall be paid for by the Contractor unless noted otherwise.