Site work and renovation of a water / sewer project in Palatka, Florida. Completed plans call for the renovation of a water / sewer project; and for site work for a water / sewer project.

The City of Palatka hereby requests bids from responsible firms for the R.C. Willis Water Treatment Plant H2S Scrubber media and fan replacement. The City shall select the lowest or most responsive bidder. The City also reserves the right to award one or both projects at the time of selection. *R.C. Willis Water Treatment Plant H2S Scrubber Media Replacement (ST12-108 Aerator by MetPro Duall)- Remove 800 Ft3 of packing from main bed Remove packing support grating Provide 30 Cu. yard dumpster for used packing Packing disposal and any decontamination as required by regulatory agencies 800 Ft3 of 3 1/2 " dia. NSF-61 polypropylene packing Replace and install NSF-61 FRP packing support grating 108" dia. Provide all labor and material to repair and place H2S Scrubber into in operation. R.C. Willis Water Treatment Plant H2S Fan and Motor Replacement (Centrifugal Fiberglass Fan) Remove existing fan and dispose Disconnect all associated electrical at J-Box Decontaminate area if required by regulatory agencies Schedule all required cranes/heavy equipment Install NSF-61 PVC fan inlet and outlet transitions if required Install new heavy duty centrifugal fiberglass fan CFM: 9,000 SP: 16" Belt Driven design motor and drives away from airstream, 40 HP TEFC Motor, 1800 RPM, 460-3-60 Mill and Chem Duty Motor Derakane 510C-350 epoxy coating applied to housing, flanges, and access door OSHAQ Belt guard OSHA Shaft and Bearing Guard/Painted OSHA Yellow Flanged inlet and outlet Bolted Inspection Door Teflon Shaft Seal Open Type Radial Bladed Fiberglass Impeller Dion 9800 Resin Fixed Speed Drives Reconnect electrical and perform start-up operations