Site work and paving for a road / highway in Carlton, Minnesota. Completed plans call for site work for a road / highway; and for paving for a road / highway.

**As of February 18, 2022, This project is already awarded to Ulland Brothers, Inc. awarded amount is not yet determined. The majority of the work on these projects involves Milling, Full Depth Reclamation, Concrete Curb & Gutter and Walk, Bituminous Surfacing, Aggregate Surfacing, and Pavement Markings. After an acceptable audit of the bids received, a recommendation for award to the lowest responsible bidder will be presented to the Carlton County Board of Commissioners at the County Board Meeting, 1630 County Road 61, Carlton MN, on January 24, 2022, 4:00 PM CST. Furnish, install, maintain, and remove Portable Changeable Message Signs (PCMS) in accordance with Contract provisions, the plan, and as directed by the Engineer. Furnish, install, maintain, and remove all traffic control devices required to provide safe movement of traffic and pedestrians through the Project at all times from commencement of the Work until Project Acceptance. Maintain roads and pedestrian facilities undergoing improvements in a condition that accommodates public traffic. Do not close roads or pedestrian facilities, except as authorized. The Engineer may modify the requirements for traffic control as deemed necessary. The Department will maintain Detour Roads established by the Commissioner for through traffic diverted from the project unless otherwise indicated in the Plan. The use of maintenance crossovers in or near the construction area is permitted if authorized by the Engineer. The Contractor is not responsible for snow removal from roads or pedestrian facilities open to public traffic. Do not suspend operations for the winter until meeting the requirements of 1803.4, "Temporary Suspensions". During authorized winter suspension, the Department will maintain traffic control devices. If traffic control devices are damaged or destroyed, the Department will pay the contractor the value of the device as determined by the Engineer.