Site work for a golf course in Belton, Missouri. Completed plans call for site work for a golf course.

The City of Belton is seeking proposals from qualified contractors for Driving Range Netting Repairs and Replacement at the Eagles Landing Golf Course located at 4200 Bong Avenue, Belton, MO 64012. All proposals must be accompanied by a Certificate of Insurance showing General Liability and Workman's Compensation (as applicable) insurance coverages and naming the City of Belton as a certificate holder. (see document provided with this advertisement for coverage amounts) All proposals must be in accordance with the document provided with this advertisement. The City of Belton reserves the right to reject any or all proposals not deemed acceptable. Currently, there are two sides of the driving range netting system located at the Eagles Landing Golf Course, an East Side and a West Side. Both sides utilize wooden utility poles roughly 53' high, spaced 50' apart on center. It is our intent to re-use the existing wooden utility poles on the East Side and replace the netting panels, including all required materials needed, to create a secure barrier. There are a total of seven (7) netting panel sections on the East Side, the two netting panel sections nearest the driving range tee area need to be 25' high, the remaining five netting panel sections need to be a minimum of 45' high. Materials used should be of high quality and carry a warranty of at least five (5) years. The East Side also has an existing 3' high coated metal chain link fence from the ground up that will remain and be used as part of the total system. The West Side will require the installation of five (5) wooden utility poles, measuring 35' above ground, spaced 50' apart from the existing three (3) wooden utility poles. The new wooden utility poles need to be able to handle the load/weight of the netting panels, cables and other materials required to secure the netting. Some type of ground maintenance fencing should be included so the netting panels won't be damaged while maintaining the grass areas at the surface. The West Side netting panels need to be 30' high not including the ground maintenance fencing. After installation of the five (5) new wooden utility poles, the West Side will have a total of seven (7) netting panel sections measuring 30' high by 50' wide that will need to be installed and secured along with the ground maintenance fencing. The replacement services for the East Side and West Side should include the following. o Removal and disposal of old netting, cables, etc. o Fitting and installation of new netting panels, cables and other materials needed to secure netting o Installation of five (5) new wooden utility poles (size and class of pole large enough to handle the weight/load specifications as described above) o Straighten and secure utility poles (as appropriate) to ensure a solid netting system o All equipment, labor and materials needed to complete the work o Materials used should be of high quality and carry a minimum warranty of five (5) years