Site work and paving for a road / highway in West Dover, Vermont. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Questions can be addressed to Road Commissioner, Travis Briggs at 802-464-2000 or 802-430-3024. Awarded at the May 3rd Select Board meeting. The contractor shall do Base and Top/Overlay on the roads listed. All hot mix shall meet State of Vermont DOT latest specifications. There will be no more than 10% recycled asphalt and no asphalt shingles in the mix All shim and overlay will have tack. 1. The contractors shall pave the following roads: Name of Road Length X Width - Depth Sugarhouse Rd New section 1122' x 22' 3" Base 1" top Heritage Rd Sugarhouse Side Resurface 1191' x 22' 1.5" top Heritage Rd Resurface from Dover Hill 1147' x 22' 1.5" top Heritage Rd New section 1270' X 22' 3" Base 1" top Spruce Haven Ln 528' x 22' 1.5" top Maple Hill Loop 1056' x 22' 1.5" top Circle View Loop 2640' x 22' 1.5" top Blue Brook Rd 3168' x 22' 1.5" top Blue Brook Rd New section 3832' x 22' 3" Base 1" top Lower Handle Rd 6336' x 24' Shim coat + 1.5" top 2. The Road Commissioner will mark all roads before work begins. 3. The contractor will provide Rollers, sweepers, signs and traffic control for paving operations. 4. All shim coats will be at least 1" minimum 5. All driveways will have a 2-foot apron. All intersecting roads must make a smooth transition both off and on roads. 6. The contractor must sweep all shimming and overlay work. The materials used for shim and overlay will be 3/8 inch stone. 7. The contractor must use two rollers when paving 8. Equipment used by the contractor must be approved by the Road Commissioner and maintained in satisfactory working condition at all times