Renovation of an educational facility in Gray, Tennessee. Completed plans call for the renovation of a educational facility.

Should any questions arise regarding these specifications, you may contact Phillip Patrick at 423-753-1100 Daniel Boone High School- Removal & disposal of the existing damaged flooring. Install a new fixed, wood sleeper and subfloor system consisting generally of resilient pads, plywood sleepers, plywood subfloor and steel anchors installed over a 6-mil polyethylene moisture barrier. 25/32" x 2 1/4 ", FIRST grade northern hard maple will be nailed approximately 16" on center. Anchored Rezill-Sleeper System DIN as manufactured by Connor Sports Flooring Corp (or product of same or better quality). Upon proper installation, the floor will be sanded smooth using coarse, medium and fine sandpaper, then rotary sanded or "screened" to remove all drum sander marks. The floor will then be sealed with TWO coats of Bona DTS, in preparation for the painting of game lines, lettering & logos as outlined below, using Bona SuperSport game line paint. Following the painting, THREE coats of WATER based gym floor finish will be applied to the entire court surface. After the finishing of the floor, 4" x 3" black vent cove base will be installed at the perimeter of the gymnasium floor and aluminum thresholds will be installed at each gymnasium doorway. Custom wood thresholds, ADA ramps and other styles of transitions differing from the aluminum thresholds described above will be priced separately. Pricing must include the detachment, moving and reattachment of the existing bleacher systems to allow the installation of the new flooring system. Replacement of (6) volleyball lids is also required. SCOPE OF WORK 1. Removal & disposal of the existing 10,000 +/- square foot court 2. Installation of new 10,000 +/- square foot floor system with FIRST Grade Maple 3. Sand, seal & finish 10,000 +/- square feet 4. Paint (1) Main Basketball Game Lines 5. Paint (1) Main Volleyball Game Lines 6. Paint (2) "DANIEL BOONE" End Court Lettering 7. Stain "B" Center Logo & Center Circle 8. Stain Three Point Areas 9. Detachment, Moving & Reattachment of Bleacher Systems during replacement 10. Replacement of (6) Volleyball Lids 11. Installation of vented cove base & thresholds Ridgeview Elementary School- Removal & disposal of the existing damaged flooring. Install a new fixed, wood sleeper and subfloor system consisting generally of resilient pads, plywood sleepers, plywood subfloor and steel anchors installed over a 6-mil polyethylene moisture barrier. 25/32" x 2 1/4 ", Second and Better grade northern hard maple will be nailed approximately 16" on center. Anchored Rezill-Sleeper System DIN as manufactured by Connor Sports Flooring Corp (or product of same or better quality). Upon proper installation, the floor will be sanded smooth using coarse, medium and fine sandpaper, then rotary sanded or "screened" to remove all drum sander marks. The floor will then be sealed with TWO coats of Bona DTS, in preparation for the painting of game lines, lettering & logos as outlined below, using Bona SuperSport game line paint. Following the painting, THREE coats of WATER based gym floor finish will be applied to the entire court surface. After the finishing of the floor, 4" x 3" black vent cove base will be installed at the perimeter of the gymnasium floor and aluminum thresholds will be installed at each gymnasium doorway. Custom wood thresholds, ADA ramps and other styles of transitions differing from the aluminum thresholds described above will be priced separately. Pricing must include the detachment, moving and reattachment of the existing bleacher systems to allow the installation of the new flooring system. Replacement of (4) volleyball lids, and the core drilling & installation of (2) volleyball sleeves/lids is also required. Additionally, approximately 50% of the stage flooring will need to be replaced. Contractor will field verify construction method of stage flooring. SCOPE OF WORK 1. Removal & disposal of the existing 10,000 +/- square foot court 2. Installation of new 10,000 +/- square foot gym floor system with SECOND and Better Maple 3. Remove and replace approximately 50% of stage flooring with OAK flooring to match 4. Replace stair treads and trim on both ends of stage 5. Sand, seal & finish 11000 +/- square feet of new gym AND stage flooring 6. Paint (1) Main Basketball Game Lines 7. Paint (1) Main Volleyball Game Lines 8. Paint (2) Cross Court Volleyball Game Lines 9. Paint (4) Badminton Game Lines 10. Paint (2) "RIDGEVIEW" End Court Lettering 11. Paint (1) 15' Multicolored Center Circle Logo 12. Painted Border 13. Paint (2) 1-26 One Color Numbers 14. Paint (2) A - Z One Color Letters 15. Detachment, Moving & Reattachment of Bleacher Systems during replacement 16. Replacement of (4) Volleyball Lids 17. Core Drilling & Installation of (2) Volleyball Sleeves & Lids 18. Installation of wall base & threshold