Site work and paving for a mixed-use development in Hinesburg, Vermont. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

Each BID must be accompanied by a certified check payable to the Town of Hinesburg for five percent (5%) of the total amount of the BID. A BID bond may be used in lieu of a certified check. PREQUALIFICATION OF CONTRACTORS: All bidders on this project shall be on the.. Agency of Transportation's prequalified list under the category listed below or shall have submitted a complete prequalification application to the Agency of Transportation, Contract Administration, a minimum of 10 working days prior to the bid opening. For information contact Jon Winter at (802) 622-1267. All bidders shall be on the current VTRANS Contract Administration pre-qualified list "Contractors List of Curb and Sidewalk Category". LOCATION: Beginning at a point on VT Route 116 in Hinesburg, VT, in front of the Hinesburg Community School, and extending south along VT Route 116 for approximately 1,250 feet. TYPE OF CONSTRUCTION: Work to be performed under this project includes: The construction of sidewalk, drainage, signing, and other incidental items. CONTRACT COMPLETION DATE: The Contract shall be completed on or before September 29, 2023. ENGINEERS ESTIMATE: For this Proposal the Engineers Estimate falls between $250,000 and $500,000. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. QUESTIONS: During the advertisement phase of this project all questions shall be addressed solely to Todd Odit, Hinesburg Town Office, 10632 Route 116, Hinesburg, VT 05461. (802) 482-4206. CONTRACT COMPLETION DATE: The Contract shall be completed on or before September 29, 2023. DAVIS BACON WAGE REQUIREMENTS: Bidders agree to abide by the Davis Bacon Wage Rate Schedule, which are appended to these Contract Documents. BUY AMERICA REQUIREMENTS: Buy America requirements of 23 CFR 635.410 are applicable to all Federal-aid construction projects. All steel or iron products permanently incorporated into Federal-aid projects, shall be products that have been entirely manufactured within the United States. All manufacturing processes of the steel or iron material, in a product, must occur within the United States to be considered of domestic origin. This includes process such as rolling, extruding, machining, bending, grinding, and drilling. The action of applying a coating to a material is deemed a manufacturing process subject to Buy America. Coating includes epoxy coating, galvanizing, painting, and any other coating that protects or enhances the value of the material. MBE: 0.8% WBE: 6.9%