Site work for a road / highway in Battle Ground, Washington. Completed plans call for site work for a road / highway.

Site Directions: To Tukes (first stop): From I-5: oExit I-5 and head east on WA-502 for 4.9 miles oWA-502 turns into W Main St then E Main St oContinue straight onto E Main St for 2.5 miles oE Main St turns into NE 219th St oContinue onto NE 219th St for 0.4 miles oTurn left and drive through the yellow metal gatesTo Larch Camp (second stop - will travel to after Tukes): Traveling from Tukes to Larch: oTurn left onto NE 219th St for 0.2 miles oTurn right onto NE 167th Ave for 1.0 mile oTurn left onto NE 199th St oNE 199th St becomes Ristro Rd and then becomes NE 182nd Ave oContinue for a total of 3.6 miles oTurn left onto NE 139th St and follow for 2.4miles oNE 139th St becomes NE Rawson Rd and then becomes L-1400 and then becomes L-1500 oFollow for a total of 8.5 miles oTurn left onto L-1000 and follow for 1.8 miles documents for $ 15.00. Contact Customer Support at 952-233-1632 or for assistance in membership registration, downloading digital project information and online bid submittal questions. Project bid documents must be downloaded from which will add your company to the Plan holder List and allow access to vBid online bidding for the submittal of your bid (which is required for this project). Bidders will be charged a fee of $42.00 to submit a bid electronically. For this project, bids will ONLY be received and accepted via the online electronic bid service through. The project consists of electrical work including replacing single and 3-phase panel boards, tracing and labeling circuits, installing chase and conduit, replacing receptacles, installing energy meters, and installing emergency lighting and exit signs. The project is located at: Tukes: 16119 NE 219th Street - Battle Ground, WA 98604 Larch Camp: 15314 NE Dole Valley Road, Yacolt, WA, 98675 The project consists of electrical work including replacing single and 3-phase panel board, tracing and labeling circuits, installing chase and conduit, replacing receptacles, installing energy meters, and installing emergency lighting and exit signs. The project consists of electrical work including replacing single and 3-phase panel board, tracing and labeling circuits, installing chase and conduit, replacing receptacles, installing energy meters, and installing emergency lighting and exit signs. The estimated cost of the project is $175,260.00, and the required substantial completion date is May 24, 2023.