Renovation of a mixed-use development in Fort Myers, Florida. Working plans call for the renovation of a municipal facility.

**As of September 29, 2023, no bids received for this project. It will be rebid but no date determined yet. The Housing Authority of the City of Fort Myers is requesting an alternate standing seam roofing panel to the specified 180-degree double roll standing seam panel. The alternate roof panel shall be a 16" wide, 24-gauge steel, 1.75" Snap Lock standing seam ribbed roof panel, with a PVDF Polyvinylidene Fluoride Low gloss paint finish, equal to MBCI Lokseam. If the snap lock panel cannot be manufactured to accommodate the existing curved roof areas, the curved roof areas may receive, a 16" wide, 24-gauge steel, 2" field seamed standing seam ribbed batten lock panel, with a PVDF Polyvinylidene Fluoride Low gloss paint finish, equal to MBCI Curved BattenLok. A separate alternate line-item price shall be provided on the bid proposal for the optional standing seam product(s). The HACFM will make their selection and project award based on the base proposal and the selection of alternates that they feel are in the best interest of the project and the HACFM. Detailed Scope: The requested alternate for the project is only for the standing seam roofing material. The remaining project scope as detailed on the base project drawings and specifications remain as specified. The roofing details provided on the drawings shall be adjusted as required to accommodate the alternate roofing material. The installation and details shall be in compliance with the manufacturer's specifications, product installation details, and installation and fastener requirements associated with the products Florida Building Code Product Approval or approved Miami Dade NOA. All wind pressure requirements for the roofing installation shall be per the current adopted addition of the Florida Building Code, the Florida Product Approval or Miami Dade NOA, or as specified on the drawings, whichever requires the most extreme positive or negative pressure for a specific roof zone. The specification on the drawings as they relate to project meetings, submittals, warranties, performance, delivery-storage-handling, underlayment, miscellaneous materials, fabrication, installation, examination, erection tolerances, field quality control, cleaning and protection, and close-out documents shall be required as specified on the base drawings and specifications. Deviation to these specifications shall only be permitted as related to the installation requirements, specific to the alternate standing seam roofing material(s), from the base specified double roll standing seam roof. Bid Each bid must be accompanied by a BID BOND in an amount not less than five percent (5%) of the total amount of the bid and any alternates as a guarantee that the bidder will not withdraw his bid for a period of ninety (90) days after the scheduled time for the receipt of bids. If recommended for award, the Contractor shall enter into a contract with HACFM. b. The Contract shall require evidence of all referenced insurance contained in this bid documents. Insurance includes Workmen's Compensation, and Public Liability Insurance, approval of subcontractors by the Owner, and delivery of a PERFORMANCE and PAYMENT BOND satisfactorily to the Owner within ten (10) days after the meeting at which the contract is awarded. HACFM reserves the right to waive formalities in any bid submittal; to reject any or all bids with or without cause. If applicable, HACFM reserves the right to select one or more vendors to provide the services and to select the bid(s) that, in its judgment, will be in the best interest of the HACFM. All questions about the meaning or intent of the IFB documents are to be directed to Procurement, e-mail: procurement@hacfm.org Question Deadline 09/04/2023