Renovation of an educational facility in Reno, Nevada. Completed plans call for the renovation of a 320-square-foot educational facility.

This is a prevailing wage project. Replace HVAC circulating pumps in mechanical room M003 (320 sq-ft) in the Sarah H. Fleischmann building. Abate asbestos containing ceiling, patch/repair and paint in M002 and M003. Labor Commissioner #: WA-2024-077 SPWD Project #23-B044 Estimated Cost Range: $150,000 to $200,000 Liquidated Damages: $500/day Question Cutoff Date: 12/20/2023 08:00 PM (ET) Once an ITB/RFP/RFQ/CMAR is released for bidding, bidders may begin working on their response and uploading required documents without submitting their bid early. The NGEM system allows for bidders to save their work. Please make use of this capability in order to give your company enough time to review your response and upload any other documents on the day the ITB/RFP/RFQ/CMAR closes so that you do not miss the cut-off time. Completion of Work: Subject to change by Owner, Work is scheduled to begin on May 20, 2024 and shall be fully complete by June 28, 2024. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. 1. DEMOLISH EXISTING (7) HVAC PUMP+MOTOR SETS, ASSOCIATED PIPING, VALVES, STRAINERS, ETC. WITHIN MECHANICAL PUMP ROOM. ELECTRICAL EQUIPMENT AND POWER DISTRIBUTION TO REMAIN AND BE RE-USED. 2. DEMOLISH EXISTING ABANDONED PNEUMATIC CONTROL TUBING. 5. INSTALL NEW 4" HOUSEKEEPING PADS FOR ALL FLOOR-MOUNTED PUMPS. 4. REPLACE DEMOLISHED PUMP+MOTOR SETS, PIPING, VALVES, STRAINERS, ETC. PER DESIGN. 5. EXPANSION TANK, POT FEEDER, AND PNEUMATIC TUBING NOT TO BE REPLACED. 6. RE-USE EXISTING POWER DISTRIBUTION FOR NEW PUMP+MOTORS