Renovation of a water / sewer project in Auburn, California. Completed plans call for the renovation of a water / sewer project.

During routine inspections, a hole was discovered on the casting of the bowl assembly for Pump 6 (ATP-2-P1601). Agency staff has identified the bowl assembly is in need of replacement, and requires contractor's assistance to perform the removal of column pipe and shaft, replacement of the bowl assembly, and reinstallation of column. The work consists of the following: Removal of the existing ATPS-2 Pump 6 including the column pipe, shaft, and all other appurtenances. Agency staff will remove the pump motor in advance of contractor mobilization of equipment. Inspection of all line shafts for straightness and all other pump components for damage. Repair any damage discovered during pump inspections (excluding pump bowl assembly). Furnishing of new pump bowl assembly. Installation of new bowl assembly, pump screen, line shafts, column pipe, and all other appurtenances to refurbish in its entirety ATPS-2 Pump 6. Agency staff will reinstall motor following pump and shaft installation. The work includes the furnishing of all labor, materials, taxes, incidentals and equipment necessary for completion of this project. Written questions regarding the Request for Quotes and/or proposed work should be directed to Heather Knutson, Engineering Services Manager by phone at 530-823-4951 or email at hknutson@pcwa.net no later than Friday, March 1st, 2024 at 5:00 pm. PROJECT LOCATION: Ophir Pump Station, 10715 Ophir Road, Auburn, CA 95603