Reference Number 0000343288 Please See The Attached Specifications And Bid Proposal For The Annual Contract Of Cast Iron Fittings. You Must Ensure That Your Extension Pricing And Grand Total Is Accurate. All Proposals Must Be On Pueblo Water's Bid Proposal Form. All Bids Must Include A Completed And Ledgible Acknowledgement Form.
Please Use Provided Bill Of Material Sheet For Bid Calculation Accuracy. All cast iron fittings shall conform to AWWA C110 and/or AWWA C153, latest revision, 2-
inch to 48-inch, for 250 psi water pressure plus water hammer. Fittings larger than 12-inch
shall be Class 150. All fittings except plugs and sleeves shall be cement lined to conform to
AWWA C104 latest revision, with a bituminous seal coat or shall be coated with fusion
bonded epoxy coating of 6 mils. Approved epoxy coatings are: 3M #303, Indurall #3300,
Mueller HP, P & L Vitralon #88-983, Keysite 740, Rust-Oleum 9500, Al-Clad 0278, Polymer
Corporation Corvel 531-6088, Scotchkote 206N, Tnemec Company Series 20 Pota-Pox
(two-part), or other epoxy coating approved by Pueblo Water.
The One Bolt Inc. fittings (4" - 12"), or Pueblo Water approved equal, may also be accepted
with the following requirements:
o Comply with AWWA Standards C153/A21.53-19, C111/A21.11-17, and C116/A21.16-
15, or latest revision thereto.
o Comply with ASTM D3139, F1674 and F477, latest revision.
o All fittings shall be coated with fusion bonded epoxy coating of 6 mils. No
exception.
o The bid shall be accompanied by a letter from the manufacturer certifying the
epoxy coating is 6 mil. Delivery Point Warehouse, 707 W 3rd Street, Pueblo, CO 81003 Purchase Type Term: 04/01/2024 - 03/31/2025 Question Deadline 03/01/2024 at 2:00 PM MT Inquiries regarding this ITB (be sure to reference ITB number) should be referred to: E-Mail: purchasing@pueblowater.org General Requirements - FOB Destination Award Requirements - All or None Award
.webp)
