Site work and paving for a road / highway in Elkton, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

8.89 mi of hot mix asphalt resurfacing, shoulder aggregate and pavement markings on Pinnebog Road from M-53 north to M-142 and Verona Road from Huron City Road north to Kinde Road, Huron County. This is a Local Agency project. Net classification required for this project is 1338 Cb In addition to the above minimum prequalification requirement for prime contractors this project includes a subclassification of Ea. If the prime contractor is not prequalified in this subclassification it must use a prequalified subcontractor. This subcontractor must be designated prior to award of the contract to the confirmed low bidder. Control Sec Job No Federal No STL 32000 217911A 24A0297 MI DOT - 2404 029 - Hot Mix Asphalt Resurfacing, Shoulder Aggregate and Pavement Markings on Pinnebog Road Completion- 9/16/2024 MBE (5.2%), WBE (6.9%), DBE (3%) PROJECT LOCATION Verona Road, begins 313 feet North of Huron City Road centerline, P.O.B. = Station 0+00, thence North and East 5.41 miles to 26 feet South of Kinde Road centerline to P.O.E., Station 285+65, in Lincoln and Bloomfield Township(s), Huron County, Michigan. Pinnebog Road, begins 46 feet North of Van Dyke (M-53) centerline, P.O.B. = Station 0+00, thence north 3.48 miles to 87 feet South of Pigeon (M-142) centerline to P.O.E., Station 183+74, in Colfax Township, Huron County, Michigan. DESCRIPTION OF WORK Verona Road work includes cold milling 1.5 inches deep, 22 feet wide and cold milling HMA approaches, a 1.64 inch HMA wearing course 22 feet wide, HMA approach paving following mainline paving, four foot Class II modified aggregate shoulders and pavement markings. The finished roadway will be painted for two lanes, each eleven feet wide. The road will have four foot aggregate shoulders. Traffic will be regulated throughout the project with single lane closures utilizing flag control. All work shall be done in accordance with the Standard Specifications and any special provisions specified in this proposal. Pinnebog Road work includes cold milling five butt joints, three guardrail locations, a 1.64 inch HMA wearing course 24 feet wide, HMA approach paving following mainline paving, four foot Class II modified aggregate shoulders and pavement markings. The finished roadway will be painted for two lanes, each eleven feet wide. Traffic will be regulated throughout the project with single lane closures utilizing flag control. All work shall be done in accordance with the Standard Specifications for Construction and any special provisions specified in this proposal