Site work and renovation of a civil project in Show Low, Arizona. Completed plans call for site work for a water / sewer project; and for the renovation of a water / sewer project.

The City of Show Low is extending an invitation for bids for the 12-Inch PE100 Pipe Slipline Installation in the City of Show Low. The work includes, but not necessarily limited to, installing approximately 4,100 linear feet of heat fused SDR11 PE100 pipe in an existing 30-inch concrete pipe. The existing 30-inch carrier pipe alignment has a single deflection angle point of approximately 28 degrees located approximately 2,470 lf from the lake intake. The carrier pipe runs from the intake pump facility at Show Low Lake and extends to the outfall at an existing irrigation canal. Upon award of contract, the bidder is required to provide a work plan that details the location of receiving pits and engineering / manufacturers calculations showing the pull lengths. The selected contractor shall also provide the terminations of the pipe at the intake and outfall per the project specifications. All work will be performed within the existing easements. The City of Show Low reserves the right to modify the Scope of Work and to reject any and all bids not deemed in the best interest of the City. Written Questions only shall be accepted until end of business Friday, April 12, 2024. Questions may be submitted to Trampas Johnston, Engineering Project Manager, tjohnston@showlowaz.gov or 180 N 9th St, Show Low, AZ 85901 The work includes, but not necessarily limited to, installing approximately 4,100 linear feet of heat fused SDR11 PE100 pipe in an existing 30-inch concrete pipe. The existing 30-inch carrier pipe alignment has a single deflection angle point of approximately 28 degrees located approximately 2,470 lf from the lake intake. The carrier pipe runs from the intake pump facility at Show Low Lake and extends to the outfall at an existing irrigation canal. Upon award of contract, the bidder is required to provide a work plan that details the location of receiving pits and engineering / manufacturers calculations showing the pull lengths. The selected contractor shall also provide the terminations of the pipe at the intake and outfall per the project specifications. All work will be performed within the existing easements.