Site work and new construction of a water / sewer project in Saltese, Montana. Completed plans call for the construction of a water / sewer project.

Kalispell District - TAFT Substation snow melt system full replacement. Vendor to propose durable system that can sustain working capability in deep snow and heavy equipment moving over the system to enter the substation. A. NOTE: Remote location a. Vendor shall arrange for porta potty rental. b. No potable water on site - vendor must provide water for workers. c. Be aware of wildlife, bees, and other i. Epi pen, other safety measure. B. Makes safe, disconnect, and demo existing snow melt systems. a. Demo, removal, and disposal of gate concrete slab. b. Recover as much of heat cable as possible for recycling. i. Place in BPA provided Washougal box - JLL PM will coordinate with BPA Investment Recovery Center (IRC) for disposal. c. Install new heat melt system properly sized for this application. i. BPA does not have preferred system and is looking for vendor to make recommendation and submittal of proposed solution with quote. ii. Prep gate slab area base, rebar, and embedded heat cable system per NEC Standards, for any recommended and heat cable system OEM specifications. C. Pour and finish concrete per current standard for depth, compaction, stability for area and use. a. Utilize heat system specifications. D. Taft is on U.S. Forest Service property and strict runoff protocols must be in place during the project. a. Provide appropriate erosion control measures during entire project. b. Straw bales and liner for the concrete cleanout to mitigate any environmental release. i. To be removed and disposed of at end of project Attachment ). E. Provide heat blanket to protect the concrete while curing if performed and impacted with winter weather. F. Perform start up, testing verification, commissioning, and documentation of the snow melt system. G. Provide in-service training for the sub operator and the FMW. H. Provide the following to JLL Project Manager within 30 days of completion. a. O & M Documentation. b. As-Built Drawings. I. Install asphalt curb / dam, or agreed upon alternative, to mitigate oil intrusion below grade. J. Prep and install asphalt patches for septic tank investigation locations. a. Compact the asphalt to match the grade of existing asphalt.