Site work and paving for a mixed-use development in Soap Lake, Washington. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

2024 Pavement Preservation. This Contract Provides for the Citywide Pavement Preservation, Including, but Not Limited to, Surface Preparation, Application of Emulsified Asphalt and Aggregate for Scrub Seal, Application of Emulsified Asphalt and Aggregate for Otta Seal, Application of Emulsified Asphalt for Fog Seal, Temporary Pavement Markings, Striping, and All Other Appurtenances Required to Complete the Work All in Accordance With the Attached Contract Plans, Special Provisions, and the Standard Specifications. The Work Shall Be Physically Complete Within 60 Working Days After the Commencement Date Stated in the Notice to Proceed. All Bidding and Construction is to Be Performed in Compliance With the Contract Provisions and Contract Plans for This Project and Any Addenda Issued Thereto That Are on File at the Office of the City Clerk, City Hall, Washington. All Proposals Must Be Accompanied by a Certified Check, Postal Money Order, cashiers Check, or Proposal Bond Payable to the City of Soap Lake and in an Amount of Not Less Than Five Percent (5%) of the Total Proposal Amount. The City of Soap Lake Expressly Reserves the Right to Reject Any or All Proposals and to Waive Minor Irregularities or Informalities in Any Proposal. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. This Contract provides for the Citywide pavement preservation, including, but not limited to, surface preparation, application of emulsified asphalt and aggregate for scrub seal, application of emulsified asphalt and aggregate for Otta Seal, application of emulsified asphalt for fog seal, temporary pavement markings, striping, and other work all in accordance with the attached Contract Plans, these Special Provisions and the Standard Specifications. This Work shall consist of providing and placing one or more layers of plant5 mixed hot mix asphalt (HMA) on a prepared foundation or base in accordance with these Specifications and the lines, grades, thicknesses, and typical cross-sections shown in the Plans. The manufacture of HMA may include warm mix asphalt (WMA) processes in accordance with these Specifications. WMA processes include organic additives, chemical additives, and foaming. This work also consists of adjusting castings to grade per the details in the Contract Plans. HMA shall be composed of asphalt binder and mineral materials as may be required, mixed in the proportions specified to provide a homogeneous, stable, and workable mixture Description The Work described in this section includes record drawings, photographs, and property release forms. or other document. Bidders are encouraged to register in order to receive automatic email notification of future addenda and to be placed on the Bidders List. For assistance, please call (509) 453-4833. Contract questions shall be directed only to the office of the Project Engineer. The Proposals will be publicly opened and read aloud shortly after the time and date stated above. Proposals are to be submitted only on the form provided with the Bid Documents.