2024 Catasauqua Road, Marcon Boulevard, Irving Street Mill and Overlay Project - 5427050

Site work and paving for a road / highway in Hanover Township, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

For the 2024 Catasauqua Road, Marcon Boulevard, Irving Street Mill and Overlay Project. The project for which Bids are being solicited is subject to the applicable provisions of the Pennsylvania Prevailing Wage Act. Question Deadline 06/12/2024 at 4:00 PM ET Each Bid must be accompanied by bid security payable to Hanover Township, Lehigh County, in the amount of ten percent (10%) of the bid price in the form of a Certified Check, Bank Check, or a Bid Bond issued by a surety meeting the requirements of Article 6 of the General Conditions. Owner reserves the right to accept or reject any or all Bids and to accept any Bid which in its judgment is in the best interest of the Owner. No Bid will be accepted if obtained from sources other than the issuing office noted above. SCOPE OF WORK - The intent of these specifications is to describe the work necessary to construct the Catasauqua Road, Irving Street and Marcon Boulevard project. A more detailed listing of the construction requirements is described in the following technical specifications. The contractor shall provide all traffic control, signage, flagmen, etc. necessary to comply with PennDOT Pub. 213, latest edition, for each location. This cost shall be incidental to the pay items. The Contractor shall supply all materials, labor and equipment necessary to properly perform the respective items of work. Any apparatus, material and labor not specifically mentioned or shown on the drawings which may be found necessary to complete or perfect any portion of the work in a substantial manner and in compliance with the requirements implied or intended in these specifications shall be furnished by the Contractor without additional compensation. This shall include all materials, devices and methods peculiar to the apparatus or system furnished and installed by the Contractor. Mill and overlay of roadway surface, full depth repair of roadway, cold-in-place roadway recycling, bituminous paving, curb replacement and storm sewer inlet top replacement.