This is a service / maintenance or supply contract in Yuma Proving Ground, Arizona. Contact the soliciting agency for additional information.

Fire Pump Testing (On-Site) Questions Due Date: Jun 12th 2024, 11:00 AM MST Online Portal The City is accepting bids for providing Fire Pump Testing / Inspection (On-Site) on City owned vehicles/equipment. It is the City's intent to have the testing performed within a specific timeframe to minimize cost incurred by City, however, more than one day may be required to inspect all equipment. Test Site shall be the City of Yuma Public Safety Training Facility - 3575 S Avenue 4E, Yuma, Arizona 85365. Per the National Fire Protection Association (NFPA 1911 - Chapter 18) A. Services shall be provided annually. Preferably in April. City of Yuma Representative and vendor will arrange for the designated day(s) for the onsite testing. B. Visually inspect the exterior to ensure all lights are operating. C. No leaking fluids etc., during the test. D. Test Site - Test Site from Draft. E. Test Site - Test Site from Hydrant. F. Environmental Conditions. G. Equipment. H. Flow-Measuring. I. Pressure-Measuring Equipment. J. Test Gauge Calibration. K. Engine Speed Measuring Equipment. L. Carbon Monoxide Monitoring. M. Engine Speed Check. N. Priming System Test. O. Vacuum Test. P. Pumping Test for Fire Pumps. Q. Overload Test. R. Pumping Test for Industrial Supply Pumps. S. Pressure Control Test for Fire Pumps. T. Pressure Control Test for Industrial Supply Pumps. U. Intake Relief Valve System Test. V. Gauge Test. W. Flowmeter Test. X. Tank-to-Pump Flow Rate. Y. Flow Measuring Points for Flowmeters. Z. Test Results. AA. A written report will be provided for each unit at the time of the tests.