Renovation of a military facility in Moses Lake, Washington. Completed plans call for the renovation of a military facility.

BID-MIL-Moses Lake RC Tenant Improvements-Military Department . Commissioning is intended to achieve the following specific objectives; this section specifies the Contractor's responsibilities for commissioning: 1. Verify that the work is installed in accordance with Contract Documents and the manufacturer's recommendations and instructions, and that it receives adequate operational checkout prior to startup: Startup reports and Prefunctional Checklists executed by Contractor are utilized to achieve this. 2. Verify and document that functional performance is in accordance with Contract Documents: Functional Tests executed by Contractor and witnessed by the Commissioning Provider are utilized to achieve this. 3. Verify that operation and maintenance manuals submitted to Owner are complete: Detailed operation and maintenance (O&M) data submittals by Contractor are utilized to achieve this. 4. Verify that the formal training, as required by the Contract Documents, has been presented to the Owner's operating personnel. Formal training conducted by Contractor is utilized to achieve this. B. Commissioning, including Functional Tests, O&M documentation review, and training, is to occur after startup and initial checkout and be completed before Substantial Completion. C. The Commissioning Provider directs and coordinates all commissioning activities; this section describes some but not all the Commissioning Provider's responsibilities. A. The following are to be commissioned: B. Plumbing: 1. Domestic Hot Water System. 2. Associated pumps and equipment for domestic hot water service. D. HVAC System, including: 1. Ductless Split System A/C. 2. Rooftop Heat Pump Unit 3. Electric Unit and Wall Heaters 6. HVAC Controls. E. Electrical Systems: 1. Lighting, including interior, exterior, egress and emergency fixtures. 2. Lighting controls other than manual switches. F. Other equipment and systems explicitly identified elsewhere in Contract Documents as requiring commissioning. Please direct questions regarding this project to the office of the Consultant. Questions Due Date: Jul 31st 2024, 1:00 PM PDT